TORO TITAN MYRIDE 60

TORO

TITAN MYRIDE 60

0

New

72967

Accurate / Verified

Operable

Please call for current pricing & availability Toro 6000 Series MyRIDE® 60" 31HP 921cc (72967) Z Master® 6000 Series with MyRIDE® Suspension System - 31 HP (23.12 kw) Kawasaki® FX 921cc Engine with 60" (152 cm) TURBO FORCE® deck. Model shown 75951. Highlights Redesigned MyRIDE® Suspension System features a suspended operator platform and adjustable rear shocks to provide a superior ride 31 HP (23.12 kw) Kawasaki® FX 921cc Engine 60" (152 cm) TURBO FORCE deck features heat-treated steel blades and our patented adjustable discharge chute Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue Features MyRIDE® Suspension System: The suspended operator platform allows up to 3.6" of travel (depending on model) and reduces impacts, bumps and vibrations. Easily and quickly adjust rear shock ride settings to personal ride preferences, without tools! Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions. 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion. A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades. Deluxe Handcrafted Seat with Arm Rests: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo. Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion. Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced. Patented Adjustable Baffle: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity. Smooth, Powerful Response: Operator Information Center: Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down. Cast Aluminum Spindle: Cools quickly for enhanced durability and performance. Specifications Engine: 31 hp (23.12 kw) Kawasaki® FX 921cc Fuel Capacity: Gasoline - 12 gallons (45 L) single-point fill Adjustable Discharge Baffle: Standard, tools-free Air Filter: Heavy-Duty Canister Air Cleaner Blade Tip Speed: 18,500+ ft/min (5,640 m/min) Blade Type: 1/4" (6 mm) thick heat-treated steel Carrier Frame: 3" x 1-1/2" (7.6 cm x 3.8 cm) tubular steel Caster Tires: 13" x 6.5"- 6" (33 cm x 16.5 cm - 15.2 cm) flat-free semi-pneumatic Deck Design: 80-Grade 7-Gauge 60" (152 cm) TURBO FORCE® w/bull-nose bumper Discharge Chute: Rubber Drive System: Hydraulic unitized pumps and wheel motors Drive Tires: 24" x 12" - 12" (61 cm x 30.5 cm - 30.5 cm) Ground Speed: 11.5 mph (19 km/h) forward Height of Cut: 1" - 5.5" in 1/4" (2.5 - 14 cm in 6 mm) increments Hour Meter: Standard Hydraulic Fluid: Premium synthetic ROPS: Folding; standard Comfort Platform: MyRIDE® Suspension System Platform Travel: 3.6" Shocks: 1 Center / 2 Rear ISO Mounts: Qty 4, 2.5" 3-D isolation mounts Seat: Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent Adjustability: 5 point adjustment on rear shocks Spindle Bearings: Greaseless ball bearings Spindle Housing: 9" (22.9 cm) diameter cast aluminum Steering Controls: 1-5/8" (4 cm) dia. levers; adjustable

45.42 L

152.4 cm

2.54 cm

13.97 cm

Yes

23.12 kW

KAWASAKI

Gas