BDT 1,57,391৳
Machine Location:520 W Church StLewisburg, Tennessee, USA 37091(Opens in a new tab)
Seller Information
View Seller InformationTractor Town
Contact:Robert Krull
Phone:+1 615-334-7064
Lewisburg, Tennessee, USA 37091
General
Year
2024
Manufacturer
ATLAS MFG.
Model
AGRIX4
Serial Number
AVAILABLE
Condition
New
Stock Number
DH1000-SB
Description
U.S. Made with a 5 Year Gearbox Guaranty. These 4 ft. Shear Bolt shredders, brush hogs are designed for 15 HP - 40 HP range tractors. They include a 40 HP Gear Box, Stump Jumper, No-Flat Tire & Wheel Assembly with Shear Bolt (SB) for Drive-line protection. Also are Powder Coated paint for long-lasting life and our Agri-X cutters are higher rated than the TSC County Line brand which retails for a lot more without powder-coated paint or stump-jumper.
*As mentioned this is our Shear Bolt (SB) version. For the Slip Clutch (SC) version it is $1,441. Check our other website link on those for more information but the cutter decks are otherwise exactly the same.
The following features are included on the 4, 5 AND 6' Cutters which create a dependable machine that can withstand years and years of use:
• Sturdy one-piece heavy 12-gauge steel frame.
• Reinforced weldments are added at stress points.
• The blade carrier is formed from a one-piece 12-gauge steel plate.
• The blade carrier has a 5/8" bar welded for extra strength and durability.
• The blade carrier rides over stumps and rocks, reducing gearbox and driveline failure. The disc also serves as a flywheel giving you more cutting power.
• The A-frame style 3-point hitch is a one-piece hitch and attaches to the mainframe allowing a fold back or flex action.
• The adjustable tail wheel gives you a variety of cutting heights.
• The 40 HP gearbox has a flange mount that is bolted to a welded, one-piece reinforcement plate on the rotary cutter mainframe.
• The PTO shaft has needle bearings in the cross joint and grade 2 shear pins.
• The blades and blade bolts are heat treated and matched to give you a swing action. The design of the blades creates an upward suction when in centrifugal motion contributing to a lower, cleaner cut."
* Note: all models are tapered and with powder coated. Powder coating can maintain its finish for 10 to 20 years or more depending on care.
Minimum PTO HP Recommendations: 4'=18 PTO HP. 5'=24 PTO HP. 6'=30-32 PTO HP (Our HD MD685 Model at 36-40 PTO HP). 7'=45-50 PTO on our HD MD785 Model. 8'=50 PTO HP. 10' Lift 3-Point Model=60 PTO HP. 10' Drag Pull Model=50 PTO HP (45 Min. PTO HP in medium and pasture type conditions).