BDT 7,61,121৳
Machine Location:4575 N HWY 81Duncan, Oklahoma, USA 73533(Opens in a new tab)
Seller Information
View Seller InformationGeneral
Year
2021
Manufacturer
JOHN DEERE
Model
Z930M
Hours
330
Serial Number
100222
Condition
Used
Stock Number
0101A058051
Operating Condition
Operable
Description
2021 John Deere Z930M
7-Iron™ PRO deck
Mulch On Demand™ Available
Gasoline Engine
Rear Discharge Deck
Propane Option Available
Engine Manufacturer/model: FX801V
Engine Power: Gross at 3,600 rpm / 25.5 hp / 19 kW
Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
Mower deck Size: 54, 60 in. / 137, 152 cm
Blade tip speed: Approximately 18,000 fpm / 60 in. rear discharge: approximately 15,000 fpm
Transmission: Hydrostatic
Speed range: 0-10 mph / 0-16.1 km/h
Drive wheels: 24x12-12
Caster wheels: 13x6.5-6
Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation
Engine
Manufacturer/Model: FX801V
Power: Gross at 3,600 rpm / 25.5 hp / 19 kW
Displacement: 52 cu in. / 852 cc
Cylinders: Two
Crankcase capacity: With filter, 2.4 U.S. qt / 2.3 L
Oil filter: Full flow, replaceable
Lubrication: Full pressure
Cooling: Air
Air cleaner: Pre-cleaner / Yes / Heavy-duty canister type with safety element
Fuel System
Fuel type: Gasoline
Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr / 4.2-7.2 L/hr
Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
Fuel tank switch/shut-off valve: Yes
Electrical System
Charge system: 20 amp
Battery voltage: 12 V
Cold cranking amp: 300 amp
Hour meter: Standard, digital
Operator presence starting system: Brake-N-Go (hand)
Drivetrain
Transmission: Hydrostatic
Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
Travel speed: Speed range / 0-10 mph / 0-16.1 km/h / Forward / 0-10 mph / 0-16.1 km/h / Reverse / 0-4.5 mph / 0-7.2 km/h
Speed and direction control: Twin levers
Hydraulic capacity: 5.9 U.S. qt / 5.6 L
Filter: Internal, replaceable
Buyer's Note
Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation
Tires
Drive wheels: 24x12-12
Load rating: 4 PR
Brakes
Dynamic braking: Twin levers
Park brake: Internal wet disk integrated in the transmission
Park brake actuation: Hand brake
PTO
Type: Electro-magnetic, 225 lb.-ft / 305 Nm
Drive: V-belt
Mower Decks
Size: 54, 60 in. / 137, 152 cm
Deck thickness: 7 gauge / 0.18 in. / 4.6 mm
Discharge: Side, Mulch On Demand™ system, rear
Height-of-cut range: Increments / 0.25 in. / 0.64 cm / 1-5.5 in. / 2.54-14 cm
Cutting width: 54, 60 in. / 137, 152 cm
Blades
Length: Varies by deck size
Thickness: 0.25 in. / 0.64 cm
Blade tip speed: Approximately 18,000 fpm / 60 in. rear discharge: approximately 15,000 fpm
Number: Three
Wheels
Caster wheel type: Flat free
Caster wheels: 13x6.5-6
Front anti-scalp rollers: RH, center, LH
Rear anti-scalp rollers: Standard
Dimensions
Length: 84 in. / 213 cm
Width: With chute down, 68, 74 in. / 173, 188 cm / Rear discharge, 63.5 in. / 161.3 cm
Height: With ROPS up, 73 in. / 185 cm / With ROPS down, 47 in. / 119 cm
Weight: 1,275 to 1,365 lb. / 578 to 619 kg
Operation
Rollover protective structure (ROPS): Yes
Slope operating limit: 20 degrees (10 degrees with material collection system installed)
Category Specific
Deck Location
Mid-Mount
Operator Controls
Lap Bars
Exterior
ROPS
Yes