2023 TORO Z MASTER PROFESSIONAL 6000 72961

2023

TORO

Z MASTER PROFESSIONAL 6000 72961

0

New

Accurate / Verified

Toro 6000 Series 72" 31HP 999cc (72961) Call for Price The Z Master 6000 Series is one of Toro's most advanced zero-turning radius mowers. It's also one of our most comfortable. This Z Master® 6000 Series mower has a 31 HP (23.12 kw) Kawasaki® FX 999cc Engine with 72" (183 cm) TURBO FORCE® deck. Highlights 31 HP* (23.12 kw) Kawasaki® FX 999cc Engine 72" (183 cm) TURBO FORCE® deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue 16cc unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points Features Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions. 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion. A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades. Deluxe Handcrafted Seat with Arm Rests: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo. Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion. Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced. Smooth, Powerful Response: Patented Adjustable Baffle: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity. Operator Information Center: Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down. Cast Aluminum Spindle: Cools quickly for enhanced durability and performance. Specifications Engine: 31 hp (23.12 kw) Kawasaki® FX 999cc Fuel Capacity: Gas/12 gal (45.4 L) Adjustable Discharge Baffle: Standard, tools-free Air Filter: Heavy-Duty Canister Air Cleaner Blade Tip Speed: 18,500+ ft/min (5,640 m/min) Blade Type: .25" (.6 cm) heat-treated steel Carrier Frame: 3" x 1.5" x 10 gauge (7.6 cm x 3.8 cm x 10 gauge) Caster Tires: 13" X 6.5" - 6" (33 cm x 16.5 cm - 15.2 cm) Flat-Free Semi-Pneumatic Clutch: Electromagnetic Deck Design: 80-Grade 7-Gauge 72" (183 cm) TURBO FORCE® w/bull-nose bumper Discharge Chute: Rubber Drive System: Unitized Pumps (16cc/rev) & Wheel Motors (17.1 cir) Drive Tires: 24" x 12" - 12" (61 cm x 30.5 cm - 30.5 cm) Ground Speed: 11.5 mph forward (18.5 km/h) Height: ROPS Height (Folded) 46.8" (118.9 cm), ROPS Height (Upright) 70.5" (179.1 cm) Height of Cut: 1.0" - 5.5" (2.5 cm x 14 cm) Hour Meter: Standard Hydraulic Fluid: Premium synthetic Length: 86.1" (218.7 cm) ROPS: Folding; standard Seat: Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent Spindle Bearings: Greaseless ball bearings Spindle Housing: 9" (22.9 cm) diameter cast aluminum Steering Controls: 1-5/8" (4.1 cm) diameter grips; adjustable, dampened Weight: 1,334 lbs (605.1 kg) Width: 73.6" (186.9 cm) with Deflector up, 87.6" (222.5 cm) with Deflector down

182.88 cm

23.12 kW

Gas

218.69 cm

186.94 cm

42.67 cm

605.09 kg