2023 SCHULTE GX150

2023

SCHULTE

GX150

New

Accurate / Verified

Yes

NEW 2023 SCHULTE GX-150 FLEXWING MOWER. Our general duty 15 foot flex wing rotary mower. A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut A four-gearbox drive line with independent slip clutches Deck protection rings are standard and protect the cutter deck from rising blades Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors. High flex wing working range of 25° down to 90° up Solid laminated tires 20” or 26” or forklift tires available 4, 6 or 8 tire options Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts Safety light kit Pro Level hitch Levelling rod (optional addition of second tension link) 540 or 1000 RPM Drive package Single chains front and rear Gearbox sight glass Heavy duty cast hinge line with wiper seals Deck protection rings are standard Cutting Width 15’ (4.57m) Overall Width 15.8’ (4.83m) Overall Length 16.8’ (5.13m) Cutting Height 1.75”-16.75” (45mm-425mm) Transport Width 93” (2.36m) Transport Height 84” (2.13m) Hitch Weight 1,702lbs (772kg) Cutting Capacity 3.5” (89mm) Minimum Tractor Size 50hp (37kw) Blade Tip Speed Center 540rpm 16,286 ft/min (4964m/min) Blade Tip Speed Wing 540rpm 15,459 ft/min (4711m/min) Blade Tip Speed Center 1000rpm 16,390 ft/min (4996m/min) Blade Tip Speed Wing 1000rpm 15,708 ft/min (4788m/min) Blade Overlap 6.5” (165mm) Divider Gearbox Rating 260hp (194kw) Center & Wing Gearbox Rating 210hp (155kw)* 540 CV Cat 6 1000 CV Cat 5 Wing Drive Shafts Cat 5 Deck Thickness .135” (10ga or 3.4mm) Side Skirt Depth & Thickness 13.6” (346mm) 1/4” (6.4mm) Wing Working Range 25° down to 90° up Wing Floating Range 25° down to 30° up

Pull-Type

Yes