2024 LS MT226HE

2024

LS

MT226HE

2436000674

New

000674

We didn’t have to improve load lift capacity by up to 22%. And we didn’t have to increase the backhoe’s digging depth by 30%. But we did. And now, after more than a 1000 hours of testing from the scorching heat of Texas to the frigid air of Michigan, the new 2024 MT2E models are here. Engine Type: 3 Cylinder, Liquid-cooled, Diesel, NA, IDI Model (Tier 4): MHI Engine HP (Gross): 24.6 PTO HP: 19.2 Rated Speed (RPM): 2,500 Displacement (cu. in): 80.4 Fuel Tank Capacity (gal): 10.6 Alternator (V-A): 12V – 50 Amps Drive Train Transmission Type: Synchro Shuttle No. of Speed: F12 X R12 Brakes: Wet, Multi-disc Steering: Hydrostatic Power Steering PTO Type: Independent Rear, rpm: 540 (Standard) Hydraulic System Control System: Position Implement pump (gpm): 7.9 Steering pump (gpm): 4.6 Total flow (gpm): 12.5 Category, 3 pt hitch: CAT I Hitch Lift capacity, lbs (Hitch end): 1,808 Remote Valves: Option Dimension Overall length (Frame to Link, in.): 119 Overall width with tires (in.): 66 Wheelbase (in.): 66 Height to top (in.): 95 Tire Size Ag Front / Rear: 7 – 14 / 11.2 – 24 IND Front / Rear: 27X8.50-15 / 43X16.00-20 VT Front / Rear: 27X8.50-15 / 43X16.00-20 Turf Front / Rear: 25X8.50-14 / 41X14.00-20 Weight Total weight without ballast (lbs.): 2,985 Options: Standard Loader valve 2pair TF LCD Instrument Panel Lowerlink – General Stabilizer – Check Link Head Lamp(LED) 12V Outlet Rubber Mat LH Side Step Tool Box Attachments FRONT LOADER – LL3001, LL3002 Bucket Size (in): 66 Maximum Lift height (in): 94.3 Clearance with Attachment Dump (in): 67 Reach at Maximum Height (in): 14.4 Maximum Dump Angle (deg.): 48 Maximum Rollback Angle (deg.): 42.5 Digging Depth (in): 4.8 Overall Height in Carry Position (in): 51.2 Lift Capacity (Bucket Pivot pin, MAX Height) (lbs.): 1,599 Lift Capacity(@ Pivot pin) (lbs.) 1,965 Breakout Force(@ Pivot pin) (lbs.): 2,962 Approx. Weight(Loader w/o Bucket)(lbs.): 741 BACKHOE – LB3001 Digging Depth (in.): 97.2 Reach from centerline of swing pivot (in.): 127.2 Loading Height (in.): 76.2 Swing Arc (deg.): 160 Transport Height (in.): 81.8 Bucket Rotating (deg.): 180 Stabilizer Spread (down position) (in.): 67.5 Stabilizer Spread (up position) (in.): 50 Bucket Digging Force (lbs.): 3,663 Options: Option Remote valve 1st / 2nd Cruise Control Lower link – Telescopic Mid PTO External Lift Control Lever Clevis Drawbar Rear Work Lamp 7-pole Horn Engine Kill Switch (Rear Fender) Fuel Cap (Locking Type) RH Side Step Seat with Suspension & Armrest Block Heater Features Redesigned air conditioning and roof configuration, providing additional head space and increased forward visibility Much improved seat comfortability Cruise control Factory A/C cab available in a 25HP tractor New hood design (LS Family look), Grill open space plus 20% LED head Lamp 1 Inch large tire size and four different tire options Larger lifting capacity, loader lifting capacity of New MT226E (LL3301/2) 1,965lbs. New MT2E & MT2 (LL3303) 2,506lbs. Workability, 4-point mount structure as well as digging depth of 97.2” and bucket digging force of 3,663lbs. TF-LCD instrument panel providing various information like, regen time, oil change interval, etc. E/G RPM interlocking switch (STD). When working at low RPM, instantaneous RPM can be increased by simply manipulating the toggle switch to momentarily increase loader speed/lift. (option)

Yes

24.6 HP

MFWD

Hydro