Call for price
Machine Location:475 6th StCedartown, Georgia, USA 30125(Opens in a new tab)
Seller Information
View Seller InformationRome Plow Company
Contact:Steve Ireland
Phone:+1 770-462-7335
Cedartown, Georgia, USA 30125
General
Year
2024
Manufacturer
ROME
Model
VRT730
Condition
New
Description
Deep Tillage Subsoiler for use with tractors in the 180 – 282hp range.
NOTE: This subsoiler requires hydraulic control. Two rear tractor hydraulic circuits required for subsoiler operation.
Number of Shanks: 7
Max Penetration: 24" (610mm)
Transport Width: 20'8" (6.3m)
Suggested Engine HP: 252-282
Net Weight: 8,050 lbs (3,651 kgs)
FEATURES:
• The main “V” frame is constructed of tough high strength tubing with an all welded box type fishplate with a 1/2” (13mm) x 6” (152mm) plate on the underside that is swept back 35°.
• Hinged with a hydraulic self-leveling device to allow uniform subsoiling in shallow and deep applications.
• Abrasive resistant alloy steel shanks which are flame cut to a parabolic curve will shatter the toughest hardpan to a depth of 24” (610mm).
• Shanks set at 30” (762mm) spacing and are shear bolt protection.
• 2” (51mm) high grade steel pivot bolt aligns shank.
• 2” (51mm) x 3/4” (19mm) tough wear strips are easily replaced.
• Designed for maximum clearance and weight transfer to drawbar of tractor. Equipped with a heavy duty vertical lift transport undercarriage.
• The hitch, main frame, and shank holding plates are designed to alleviate lateral and torsional stress and are all low hydrogen welded.
Standard Equipment:
• Center “V” frame is all welded box type construction made of 6” (152mm) x 8” (203mm) x 3/8” (10mm) rectangular tubing with 1/2” (13mm) x 6” (152mm) fishplates.
• Parabolic curved shanks are 1-1/2” (38mm) x 11” (279mm) x 42” (1067mm) grade T1 alloy steel.
• Shear bolts are 1” (25mm) x 5” (127mm) grade 5.
• Four 12.5L x 16 – 12 ply tires. Two transport and two gauge wheels all on eight bolt hub assemblies.
• Hydraulic control group includes one 5” (127mm) x 12” (304mm) drawbar cylinder, one 5” (127mm) x 16” (406mm) transport cylinder, hoses, and quick couplers to reach the rear of the tractor.
• Depth gauge rod provides leveling (frame) adjustment.
• Gauge wheels determine the desired working depth; adjustments made with the gauge wheel adjusting rods.
• Cylinder lock assemblies for each cylinder rod keeps cylinder from retracting if pressure is lost while transporting.
• Bolt on hard surfaced fabricated points for shanks.
Rome