MYR RM7,423
Machine Location:520 W Church StLewisburg, Tennessee, USA 37091(Opens in a new tab)
Seller Information
View Seller InformationTractor Town
Contact:Ask for Sales Dept.
Phone:+1 615-334-7064
Lewisburg, Tennessee, USA 37091
General
Year
2005
Manufacturer
JOHN DEERE
Model
F325
Condition
Used
Stock Number
B0647
Description
Here is a very clean, original John Deere F325 Series Plow. This 4 Reset Integral Moldboard 4 Bottom Hydraulic Plow does have it's Coulters with it (see separate pictures). The owner’s manual is available to order online for $25.
Specifications:
* 4-Bottom: 16 inch frame for any make and model tractor but at the time of production John Deere made this for the following models 1520 (38 HP Drawbar 48 HP PTO) 2010 (38 Drawbar / 47 PTO) 2020 2510 2520 3010 and 3020 (57 HP Drawbar / 71 PTO) Tractors. So if you have 38 Drawbar HP or more you should be ok for average or lighter type soil. But 50-60 HP or more is probably ideal.
* Depth Range: Up to 12 in. depending on soil conditions and type of bottoms
* Clearance: Force-and-aft, 28 in. under frame bar, 29-1/2 in. ; under truss tube, 27-1/2 in.
* Leveling: Lateral (sided to side) leveling controlled by right-hand leveling crank on the tractor 3-point hitch. Fore-and-aft leveling controlled by center on tractor hitch.
* Landing: Screw Type
* Standards: Power-reset, single-pivot action
* Bottoms: NU bottoms, high-speed slat bottoms, SDT 446 slat bottoms, and SDT 546 FC semi-deep tillage bottoms.
* Landsides: No. 13 for all bottoms except rear bottom, which requires a No. 12 adjustable rear landside.
* Gauge Wheel: Special equipment. Wheel for 4.00x12 in. tire and tube with or without tire tube.
* Coulters: Cushioned by two rows of cupped washers. 17 in. plain with chilled-cone bearing, regular. 17 in. ripped edge with chilled-cone bearing, optional. 17 in. or 20 in. plain or ripped edge with antifriction bearing, optional.
* Hydraulic System: John Deere System for John Deere Tractor with closed-center constant pressure system, regular. Accumulator System for other tractors that do not have adequate hydraulic capacity and closed-center hydraulic system, optional.
SHIPPING: Can palletize and ship in the U.S. for $200 to $750 range depending on how far you are away from TN. Shipment to the far northeast U.S. or the west coast slightly more. Or feel free to arrange your own freight pick up and we can load this item onto any type trailer into any enclosed truck or trailer.
Category Specific
Mounting Type
Pull-Type
Number of Bottoms
4