2024 ROME 265-72

2024

ROME

265-72

New

Flex Wing Tandem Disk Harrow for use with tractors in the 343-377hp range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation. Number of Disks: 72, Number of Bearings: 24, Width of Cut (ft/in): 29'5" (9.0m), Transport Width (ft/in): 15'9" (4.8m), Transport Height (ft/in): 16'4" (5.0m), Weight Per Disk: 273 lbs / 124 kgs, Net Weight: 19,120 lbs / 8,673 kgs. 11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered oil bath roller bearings. FEATURES: • Uniquely designed harrow is available in three wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all plowing applications. • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability. • Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport. • 9” (229mm) ground clearance with standard 28” (711mm) diameter disk blades. • Fixed gang angles of 20° for both front and rear gangs. • Tapered gang assemblies. • Hydraulic down pressure kit to keep wings rigid. • Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades. • Equipped with Timken dual tapered oil bath roller bearings. • Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost. Standard Equipment: • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades. • Oil bath lubricated disk type balk buster. • Tapered gang assemblies. • Heat treated alloy steel gang axles. • Heavy duty fabricated steel spacers. • Adjustable disk blade scrapers. • Heavy duty bearing wear plates. • Eight 12L x 15 farm highway service tires for transporting, plowing, and turning. • Wheel hubs with two tapered roller bearings on each hub that are dust and moisture protected. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Rod stops for depth control adjustment. • Hardened pins and bushings on all pivot points. • Drawbar jack stand and safety chain. Optional Equipment: • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades. • 28” (711mm) diameter x 5/16” (8mm) thick, round (smooth) front and rear shallow concavity disk blades. • 28” (711mm) diameter x 5/16” (8mm) dura-faced disk blades available in all configurations. • Rear hitch assembly. • Rear hydraulic group. • Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay. • Light group.