Call for price
Machine Location:475 6th StCedartown, Georgia, USA 30125(Opens in a new tab)
Seller Information
Rome Plow Company
Contact:Steve Ireland
Phone:+1 770-462-7335
Cedartown, Georgia, USA 30125
General
Year
2024
Manufacturer
ROME
Model
185-978
Condition
New
Description
Flex Wing Tandem Disk Harrow for use with tractors in the 250-350hp range.
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.
Number of Disks: 78, Number of Bearings: 24, Width of Cut (ft/in): 29'6" (9.0m), Transport Width (ft/in): 15'6" (4.7m), Transport Height (ft/in): 12'6" (3.8m), Net Weight: 14,430 lbs / 6,545kgs.
9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings.
FEATURES:
• Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability.
• Weld on gang standards for optimum strength and rigidity assures precise gang alignment.
• Hydraulically controlled transport assembly and wing fold up.
• Wing fold mechanism allows wings to float up and down 5° when disk plowing.
• Equipped with oil bath dual tapered roller bearings.
• Spring loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control.
• Fixed gang angle of 18° for both front and rear gangs.
• Adjustable height on hitch clevis allows for straight line pull and helps prevent gouging of the front gangs.
• 9” (229mm) ground clearance with 24” (610mm) diameter disk blades.
• 185lbs (84kg) of harrow weight per disk blade.
185-966
66
16
25’-2” (7.7)
15’-6” (4.7)
9’-9” (3.0)
200 – 285
12,210 (5538)
185-978
78
24
29’-6” (9.0)
15’-6” (4.7)
12’-6” (3.8)
250 – 350
14,430 (6545)
185-982
82
24
31’-0” (9.5)
15’-6” (4.7)
13’-0” (4.0)
265 – 370
15,170 (6881)
185-986
86
24
32’-6” (9.9)
15’-6” (4.7)
13’-6” (4.1)
290 – 400
15,910 (7217)
185-990
90
24
34’-0” (10.4)
15’-6” (4.7)
14’-6” (4.4)
310 – 410
16,650 (7552)
185-994
94
24
35’-6” (10.8)
15’-6” (4.7)
15’-0” (4.6)
400 +
17,390 (7888)
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation.
Standard Equipment:
• 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life.
• Tapered gang assemblies.
• Disk type balk buster.
• Adjustable disk blade scrapers.
• Heat treated alloy steel gang axles.
• Heavy duty cast steel spacer spools.
• Bearing wear plates.
• Cylinder rod stops for positive depth control adjustment.
• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
• Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that are dust and moisture protected.
• Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity.
• Transport locks pin wheels in raised position for transport.
• Two heavy duty gang wrenches.
• Drawbar jack stand.
Optional Equipment:
• 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades.
• 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades.
• Rear hitch assembly.
• Rear hydraulic group.
• Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay.
• Light group.