2024 ROME 185-986

2024

ROME

185-986

New

Flex Wing Tandem Disk Harrow for use with tractors in the 290-400hp range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation. Number of Disks: 86, Number of Bearings: 24, Width of Cut (ft/in): 32'6" (9.9m), Transport Width (ft/in): 15'6" (4.7m), Transport Height (ft/in): 13'6" (4.1m), Net Weight: 15,910 lbs / 7,217kgs. 9” (229mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken oil bath dual tapered roller bearings. FEATURES: • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability. • Weld on gang standards for optimum strength and rigidity assures precise gang alignment. • Hydraulically controlled transport assembly and wing fold up. • Wing fold mechanism allows wings to float up and down 5° when disk plowing. • Equipped with oil bath dual tapered roller bearings. • Spring loaded self-leveling hitch with front to rear leveling turnbuckle gives precise leveling control. • Fixed gang angle of 18° for both front and rear gangs. • Adjustable height on hitch clevis allows for straight line pull and helps prevent gouging of the front gangs. • 9” (229mm) ground clearance with 24” (610mm) diameter disk blades. • 185lbs (84kg) of harrow weight per disk blade. 185-966 66 16 25’-2” (7.7) 15’-6” (4.7) 9’-9” (3.0) 200 – 285 12,210 (5538) 185-978 78 24 29’-6” (9.0) 15’-6” (4.7) 12’-6” (3.8) 250 – 350 14,430 (6545) 185-982 82 24 31’-0” (9.5) 15’-6” (4.7) 13’-0” (4.0) 265 – 370 15,170 (6881) 185-986 86 24 32’-6” (9.9) 15’-6” (4.7) 13’-6” (4.1) 290 – 400 15,910 (7217) 185-990 90 24 34’-0” (10.4) 15’-6” (4.7) 14’-6” (4.4) 310 – 410 16,650 (7552) 185-994 94 24 35’-6” (10.8) 15’-6” (4.7) 15’-0” (4.6) 400 + 17,390 (7888) *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation. Standard Equipment: • 24” (610mm) diameter x 1/4” (6mm) thick, smooth (round) shallow concavity disk blades for longer life. • Tapered gang assemblies. • Disk type balk buster. • Adjustable disk blade scrapers. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Bearing wear plates. • Cylinder rod stops for positive depth control adjustment. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Wheel hubs have 8-bolt, 6000lb (2722kg) slip in spindles on center frame and wings with two tapered roller bearings on each hub that are dust and moisture protected. • Four dual sets of 12Lx15 farm highway service tires on center frames and wings for maximum floatation and tire capacity. • Transport locks pin wheels in raised position for transport. • Two heavy duty gang wrenches. • Drawbar jack stand. Optional Equipment: • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and smooth (round) rear shallow concavity disk blades. • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) front and rear shallow concavity disk blades. • Rear hitch assembly. • Rear hydraulic group. • Extra heavy duty bearing wear plates with 1/4” (6mm) hard plate overlay. • Light group.