2024 ROME TAW16

2024

ROME

TAW16

New

Wheel Offset Disk Harrow - For Use with Tractors in the 84-105hp Range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. 12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings. 16 Disks, 379lb (172kg) Weight Per Disk, 6067lbs (2752kg) Net Weight FEATURES: • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • Dual purpose transport unit for transportability and penetration control. • Combines ease of maneuverability with high strength for the most adverse conditions. • High gang carrier design to prevent trash build up and clogging. • Greaseable dual tapered roller bearings. • Levels, cuts, and mixes to full working depth. • Up to 384lbs (174kg) of weight per disk blade depending on model with an average of 366lbs (166kg). • Full range of adjustments to control depth of penetration – up to 9” (229mm) with standard 28” (711mm) diameter disk blades. STANDARD EQUIPMENT: • 28” (711mm) diameter, 3/8” (10mm) thick, cutout (notched) deep concavity disk blades. • Adjustable disk blade scrapers. • Heavy duty bearing wear plates. • New industrial tires – 2 each. TAW-16 thru TAW-24: 12.5L x 15. TAW-28 and TAW-32: 21.5L x 16.1. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • 30” (762mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades. • 30” (762mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades. • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades. • Cylinder rod stops.

2.13 m