2024 ROME TRH16S

2024

ROME

TRH16S

New

Woods Special Hinge Offset Disk Harrow for use with tractors in the 165-190hp range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. Width of Cut (ft/in): 9'0" (2.7m), Number of Disks: 16, Weight Per Disk: 647 lbs / 294 kgs, Net Weight: 10,344 lbs / 4,692 kgs. 14” (356mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings. Standard Equipment: • 32” (813mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades. Mechanical angling control. • Adjustable disk blade scrapers. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Drawbar jack stand and safety chain. Optional Equipment: • Cylinder rod stops. • Weight box. FEATURES: • For deep plowing, and plowing after clearing. • Special reinforcement for woods site preparation and other severe applications. Includes strengthened gang carriers, drawbar, offset bar, stabilizer, latch, bearing standards and bearing brackets. • High gang carrier design to prevent trash build up and clogging. • Adjustable disk blade scrapers. • Equipped with Timken dual tapered roller bearings. • Up to 647lbs (294kg) of weight per disk blade depending on model with an average of 608lbs (276kg). • Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.