2024 ROME TRCW20

2024

ROME

TRCW20

Used

Wheel Offset Disk Harrow - For Use with Tractors in the 375-450hp Range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. Two rear tractor hydraulic circuits required for harrow operation. 20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings. 20 Disks, 1088lbs (494kgs) Weight Per Disk, 21750lbs (9866kgs) Net Weight. FEATURES: For deep plowing, plowing in heavy trash, mixing and aerating. Heavy duty proven design with rugged construction welded for maximum strength and rigidity. Adjustable disk blade scrapers. Equipped with Timken dual tapered roller bearings. High gang carrier design to prevent trash build up and clogging. Heavy duty torsion tube for distributing the torque generated by the front right gang. Hydraulic tongue leveler with nitrogen accumulator. Up to 1088lbs (494kg) of weight per disk blade depending on model. Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades. Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades. STANDARD EQUIPMENT: Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. 36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades. Hydraulic tongue leveler with nitrogen accumulator. Drawbar jack stand and safety chain. Adjustable disk blade scrapers. OPTIONAL EQUIPMENT: Heat treated alloy steel gang axles. 42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades. Heavy duty fabricated steel spacer spools. Cylinder rod stops. Heavy duty bearing wear plates. Light group. New industrial tires – 4 each TRCW-20 and TRCW-24: 21.5 x 16.1 – 14 ply. Oil Bath Bearings