Call for price
Machine Location:2406 US-78Tallapoosa, Georgia, USA 30176(Opens in a new tab)
Seller Information
View Seller InformationPro Grade Equipment
Contact:Paul Hofius
Phone:+1 678-726-6167
Tallapoosa, Georgia, USA 30176
General
Year
2024
Manufacturer
WACKER NEUSON
Model
EZ50
Hours
0
Condition
New
Hours Meter
Accurate / Verified
Description
Call for pricing and availability. Nationwide shipping!
EZ50 Tracked Zero Tail Excavator: The compact and powerful zero-tail excavator
Full speed ahead: The EZ50 mini-excavator offers excellent lifting and digging power as well as quick work cycles. Using the newest technologies, the emissions of the mini-excavator were reduced and, at the same time, the efficiency increased. For example, the powerful engine in the EZ50 meets the stage 5 exhaust emission standards. In terms of operator-friendliness, the excavator is impressive. The intuitive operating concept and excellent view of the work area contribute to the easy and comfortable operation of the machine. The EZ50 is also a zero-tail excavator and is well suited for working in narrow spaces.
3-point kinematics
With 3-point kinematics, the conventional bucket linkage has been taken to a new level. This "3-bolt" design extends the bucket's angle of rotation to 200 degrees - 10% more than conventional bucket linkage. This increases the vertical dig depth as well as the digging forces. This eliminates the need to reposition the excavator as often, significantly increasing efficiency.
Active Working Signal (AWS)
The red LED strip running diagonally over the engine hood lights up when the joystick control is pressed down. This signals to bystanders nearby that the excavator is ready for operation and can be moved at any time.
Flexible cylinder rod protection
The cylinders and the cylinder rods are protected from damage thanks to the plastic rails, which lengthens their service life and saves costs. Due to their flexible material, they return to their original shape after an impact. Their appearance and characteristics are completely retained.
Load Sensing Flow Sharing
Load Sensing Flow Sharing enables precise and efficient control of the excavator. The machine adjusts to the load and the joystick movements are always kept the same for the operator.
The hydraulics work more efficiently, saving energy and ultimately costs. But it also makes operation easier for the operator.
Load-sensing systems help to regulate the flow rate according to demand. The less power is used, the lower the fuel consumption.
Zero Tail
When space is limited: Pivot safely, even in the tightest of spaces or right next to the wall - with the Zerotail excavator without rear overhang, no problem.
Optimal working in limited working conditions, high maneuverability and time savings are guaranteed.
Mechanical Output Details
Superstructure turning speed 9.5 kg/m2s
Travel speed 2.7 m/H
Break Out Force Bucket 8,273 Anz
Break Out Force Lift Arm 5,575.3 Anz
Mechanical Details
Length 238.2 "
Operating weight (min.-max.) 10,685.8 - 12,908.1 lb
Digging depth (max.) 144.4 "
Width 77.2 "
Height 105 "
Weight 10,178.75 lb
Engine
Cylinder 3
Cylinder capacity 101.4 Inch3
Inclined position max. 30 λ
Effective power 43.6 fps
Nominal Engine speed 2,000 kg/m2s
Battery capacity (nom. value) 77 cos φ
Motor type Diesel engine
Fuel type Diesel EN 590
Exhaust-gas limit EU Stage V
Manufacturer Perkins
Engine designation 403J - E17T
Hydraulic
Operating pressure 3,552.5 lb/h
Flow rate 33.3 PS
Flow rate max. 33.3 PS
Operating pressure slewing gear 209 bar
Hydraulikpump Axial piston pump
Shipping and Storage
Shipping weight 10,178.8 lb
Dimensions
Distance bucket dozer blade, short shovel arm 16.9 in
Distance bucket dozer blade, long shovel arm 13.12 in
A1 Height with cab 100.67 in
A3 Total height with rotating beacon 105.08 in
B1 Width of upper carriage 67.93 in
B2 Width of cab 38.61 in
B3 Width travel gear 77.22 in
B4 Width of dozer blade 77.22 in
C Transport length short shovel arm 215.4 in
C Transport length long shovel arm 215.99 in
D1 Digging depth max., short shovel arm 136.6 in
D2 Digging depth max., long shovel arm 144.48 in
E1 Piercing depth max., short shovel arm 82.15 in
E2 Piercing depth max., long shovel arm 89.12 in
F1 Piercing height max., short shovel arm 215.52 in
F2 Piercing height max., long shovel arm 220.6 in
G1 Dumping height max., short shovel arm 144.01 in
G2 Dumping height max., long shovel arm 149.09 in
H1 Digging radius max., short shovel arm 233.09 in
H2 Digging radius max., long shovel arm 242.31 in
I1 Max. reach at ground level (short shovel arm) 228.28 in
I2 Max. reach at ground level (long shovel arm) 235.93 in
J Tail swing radius 41.25 in
J Tail swing radius with tail weight 45.39 in
K1 Boom offset max. (to center of bucket right side) 30.1 in
K2 Boom offset max. (to center of bucket left side) 30.34 in
L Stacking height max. (dozer blade above surface) 16.15 in
M Digging depth max. (dozer blade below surface) 17.45 in
N Length travel drive 98.82 in
O1 Max. swivel angle (arm system to the left) 70 °
O2 Max. swivel angle (arm system to the right) 55 °
Q1 Boom swing radius center 98.7 in
Q2 Boom swing radius right 91.76 in
Q3 Boom swing radius left 81.32 in
Category Specific
Operating Weight
5,855.02 kg
Exterior
ROPS
Enclosed
Engine
Engine Manufacturer
Perkins
Engine Model
403J - E17T