2022 POSEIDON 125X100-250A-ADP50

2022

POSEIDON

125X100-250A-ADP50

New

4JG1Pk

Engine details: Engine make: Isuzu diesel engine Engine model: 4JG1PK PRM Full power: 33.9kw @ 2000rpm Fuel consumption: 7L/hour approx. (to be confirmed) Fuel tank capacity: 250 Litres Base size: 2400 x 900 x 150mm complete with a central lifting frame, this base is ready to be bolted onto either an optional Skid base or road trailer base. Control panel: Standard industrial start / stop control panel. Complete with a battery isolator, ignition isolator, steel battery box and an emergency stop button. The pump set will also be fitted with two LED lights. Pump and Trailer details: Pump Model: HP125X100-250A-ADP50-EI2000W Type: Poseidon Auto Prime Dry run centrifugal pump, complete with a 50cfm Smartprime vacuum diaphragm pump and a Poseidon mechanical seal oil bath, dry running system. Duty flow: 50L/sec (best efficiency point @ 2000rpm) Maximum flow: 63L/sec @ 2000rpm Duty head: 40m (best efficiency point @ 2000rpm Maximum head: 48m @ 2000rpm Nominal pump speed: 2000rpm Maximum curve power: 31.5kw Duty point power: 28.5kw Self-priming capacity: to 8.4m (but is depended on flow is reduced on higher flows) Pump build: - Casing: Ductile iron - Impeller: Cast iron - Shaft: 431 Stainless Steel Pump inlet size: 125mm enlarged with a hot dip galvanized reducer up to 150mm. the reducer is fitted with a 150mm female Bauer fitting. Pump outlet size: 100mm fitted with a hot dip galvanized male Bauer fitting and a 100mm butterfly valve for throttling / regulating the pump flow. Road trailer base: a hot dip galvanized single axle trailer chassis with an ATM of 1600kg. the pump is set to be mounted in this trailer chassis. Other trailer features: -ATM 1600kg with mechanical disc brakes -Heavy duty, double rolled, chequer plate mud guards -Slipper spring assembly painted -100% Australian drawbar steel -100% Australian chassis steel -Fully welded chassis -Solid axle painted (1045 Duraflex steel) -Brand new light truck tyres with spare -Quality Japanese bearings -Spring hangers welded to flat bar (for added strength) -Ho dip galvanized finish -ADR approved LED lights -Soldered and heat shrunk wiring -Front and side reflectors -9 x 10 Finsbury trailer mud flaps -Rated stamped safety chain -Allowed for an 8 heavy duty jockey wheel -SA govt. trailer inspection Additional items: -a hot dip galvanized vandal proof enclosure, lockable and complete with a zinc plated roof, fitted t cover the full pump -to supply and fit a hot dip galvanized trailer hose holder for 4 x 6 suction hoses -to extent the trailer base (to fit toolbox) and fit a lockable 1400 x 700 x 800mm aluminum toolbox in front of the engine -add a 4.5kg powder extinguisher mounted in a sturdy holder -supply 6 corrugated suction hose sections x 3 to 3.2m long fitted with male and female Bauer fittings -supply 4 red lay flat delivery hose sections x 20m long, fitted with male and female Bauer fittings -solar battery charging unit -amber rotating beacon