Call for price
Machine Location:0000Atlanta, Georgia, USA 30301(Opens in a new tab)
Seller Information
View Seller InformationGeneral
Quantity
100
Year
2025
Manufacturer
CIE
Condition
New
Stock Number
CIE2040SLATL
Description
20/40' SL Combo Tridem
FET NOT INCLUDED IN THIS PRICE!
1.Function
Carries one (1) 20' loaded, one (1) 40' loaded or two (2) 20' empty ISO containers.
Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications
2.General
Overall Length:
40' 11" extended/ 31' 7" retracted (Excluded rear bumper)
Overall Width:
96"
Fifth Wheel Height:
47"±1"
Rear Deck Height:
48"±1"
Kingpin Location:
17 1/2" (From rear face of front bolster)
Axle Spread:
61"
Tridem Location:
25" (From rear face of rear bolster on slider to rear axle center)
Tare Weight:
10,600 Lbs. (±2%)
Gross Vehicle Weight Rating:
20' loaded 77,000LBS; 40' loaded 85,000LBS
3.Steel Structure & Components
Material:
High strength GR50, GR80 and GR130 steel
Painting:
E-coat primer (min. 20μm) and Powder coating topcoat (approx. 60μm). 7 years warrantyTopcoat color: Black RAL 9005 Metal preparation: Commercial abrasive blast of all metal surfaces to achieve clean bare steel.Four (4) corner portions on front and rear bolster, touching corner casting of container, shall be painted as Yellow RAL 1018
Main Beam:
16" x 5" fabricated I-beam with high strength flanges, 6 11/32" hight for GN rail
Slider Beam:
14 3/4" deep x 5" wide fabricated I-beam, 2-pin locking system
Crossmember:
3/16” and 1/4” thick fabricated channel type with triangular steel gussets
Upper Coupler:
1/4" thick pick up plate w/ 2" dia. drain holes, reinforced by 1/4" thick channel type kingpin supportsSAF-Holland, Jost or Wallace Forge 2" AAR certificated kingpin
Front Bolster:
Dual position for front 20’ empty container and 40’ loaded container
Intermediate Bolster:
Fabricated with retractable twist locks, Hi-Lo intermediate bolsters fabricated with swing down twist locks
Rear Bolster:
6 5/8" height x 4" wide fabricated box beam bolster with flip-up twist locks
Rear Bumper:
The bumper step should be designed so that the legally mandated reflective tape is mounted in a recessed area, to prevent reflective tape damageThe step guard is 3/16” x 4” x 4” square
Twist Lock:
Schulz or Buffers compact retractable twist locks
Landing Gear:
JOST A440 series landing gear, 62,500 lbs. lift capacity with 100 ft-lbs. input torque, 170,000 lbs. maximum static load rating, 33,000 lbs. side load capacity. 2-speed 17” Travel. Square leg 10” x 10” square low-profile sand shoes and solid axlesThe centerline of the landing gear shall be located 100 1/2" from the centerline of king pin.
Landing Gear Support Bracket:
50.7874" mounting distance (distance between mounting surface of landing gear support brackets)1/4” thick high tensile steel “deep” channel type bracket with two gussets each sideSupported by angle brace and C channel brace
Suspension:
Hutch tridem underslung mechanical suspension with fabricated hangers - Huck Bolts3/4" spring seat height, 61" axle spread, 36" spring centerStandens 360-00 single leaf high arch spring or Dayton equivalent
Axles:
Meritor 5" round axle with 22,500 Lbs. capacity71 1/2" track with intermediate long 28 spline cam shaftCam rear & Rod under axle orientation16 1/2" X 7" Q+ Brake
Wheel End:
Meritor Axlepak 5 wheel end packageFumaq ferrous hub, Automated/Frum/CIMC cast drum or equivalentMeritor branded bearing (Manufactured by C&U) HM212049/HM212011 HM218248/HM218210National - 5 star gold 380025TX sealHub Cap: National - 5 star gold HWGOP-609 vented grease hub cap or Stemco equivalentChevron DELO SF Grease
Rims:
Jingu 8.25 x 22.5 steel, hub-pilot disc wheels with 5 hand holes or Accuride, Sunrise equivalent, White
Tires:
Westlake 255/70R22.5 tubeless type, 16 ply, CR976A or Linglong, Double Coin equivalent
Brake System:
Wabco 4S/2M ABS brake systemSealco Spring Valve 110800Haldex 3030 2.5" stroke brake chamberHaldex 5.5" ASA 28 spline 409-20002Hoosier air tank HT-9501 or Sanborn equivalentPhillips Gladhand 12-0061, 12-0081 & 12-0101Tremac Sloan fitting
Electrical:
Phillips harness with integrated Phillips 16-724 receptaclePhillips 3/4" marker light and ABS light with 2" flangePhillips 4" Stop/Turn LED tail lamp with anti-theft platePhillips 2.5" Rectangular LED license lamp
THE NATIONWIDE HAUL EDGE
- We finance All Equipment! Even if you didn't buy from us!
- Free Trucking Insurance Quote & Policy review for all Customers
- DOT for Life - All equipment we sell gets a free DOT Inspection for lifetime
- Extended Warranty options on All Equipment
- GAP Insurance & Roadside Assistance is Available
- We accept all Trade proposals and pay top dollar!
- Free TCS Fuel Card (Save an average of 42 cents Per Gallon)
Chassis
Suspension
Spring
Tires
11R22.5
Number of Rear Axles
Tandem
Axle Type
Fixed
Weights & Dimensions
Length
12.19 m
Width
243.84 cm