TWD $510,977
Machine Location:6111 Paris RdColumbia, Missouri, USA 65202(Opens in a new tab)
Seller Information
View Seller InformationHenderson Implement
Contact:Phillip Brooks
Phone:+1 573-448-7032
Columbia, Missouri, USA 65202
General
Year
2023
Manufacturer
SCAG
Model
SCZII-61V-31FX
Serial Number
T5501891
Condition
New
Stock Number
SCT5501891
Description
2023 Scag Power Equipment SCZII-61V-31FX
61" Velocity Plus™ Cutter Deck, 31 HP Kawasaki® FX Series
FEATURES
• The envy of the neighborhood - 61" or 72" Cutting Width: The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag's ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
• Ogura PTO Clutch Brake - Strong, Adjustable Clutch for Long Life: The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
• Hydro-Gear ZT-5400 Transaxles - Speeds Up To 16 MPH!: Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle's design greatly reduces hoses and possible leak points.
• Heavy-Duty, Double-Tube Steel Main Frame - Solid Design for Years of Dependable Service: The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
• 12-Volt Outlet - Keep Your Device Charged and Ready: 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
• Ease of Maintenance - More Uptime: Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
• Powerful and Efficient Engine Options - Huge Power, Up To 38 HP: Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine.
• Tiger Eye Advanced Monitoring System - Keep a Real-Time "Eye" on Important System Functions: Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator's seat.
• Cheetah II Operator Suspension System - Unparalleled Comfort: With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it's needed, and only where it's needed. The seat's 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
SPECIFICATIONS
• Description: 61" Velocity Plus™ Cutter Deck, 31 HP Kawasaki® FX Series
• Total Fuel Capacity: 13 gallons
• Drive Tires: 24" x 12"-12"
• Caster Tires: 13" x 6.5"-6"
• Seat: 4-point iso-mounted mid-back mounted on operator-suspension platform
• Drive System Type: Hydro-Gear ZT5400 Transaxle. Two-Speed
• Pumps: Internal Pump: 16 cc
• Motors: Internal Motor: 21 cc
• Forward Ground Speed: 16 mph (high-speed); 12 mph (low-speed)
• Reverse Ground Speed: 8 mph (high-speed); 5 mph (low-speed)
• Parking Brake: Foot-operated pedal
• Cutting Widths: 61" and 72"
• Type: Velocity Plus™
• Cutting Height: 1.25" to 5" in .25" increments
• Deck Lift: Adjustable foot-operated pedal
• Construction: Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.
• Spindles: Cast-iron housing with tapered roller bearings.
• Blade Engagement: Ogura GT5 (350 ft lb); Adjustable air-gap for extended life.
DIMENSIONS
• Length: 85.5"
• Width (chute down): 73.5"
• Width (chute in transport position): 62.75"
• Height (ROPS folded): 49.5"
• Height (ROPS up): 67"
• Weight: 1,364-1,392 lb
ACCESSORIES
• Clam-Shell Grass Catcher
• 3-Bag Grass Catcher
• Hurricane Plus™ Mulch System
• Mulch Plate
• OCDC - Operator-Controlled Discharge Chute
• Tiger Stripe Kit
• Trailer Hitch
• Chrome Wheel Covers
• Air Filter Monitor
• Blade Buddy
Capacities
Fuel Capacity
49.21 L
Category Specific
Cutting Width
154.94 cm
Deck Location
Front-Mount
Deck Discharge Type
Side
Exterior
ROPS
Yes
Powertrain
Horsepower
23.12 kw
Engine
Engine Manufacturer
KAWASAKI