2018 CORNHUSKER 44' 10" X 87 1/2" X 96", WHITE SKIN

2018

CORNHUSKER

1T92C4521J0007343

Used

X5652

2018 Cornhusker hopper, 44' 10" x 87 1/2" x 96", White skin, 30" x 52" Aluminum traps with gear boxes, Orange Shur loc roll tarp,* NO EPA covers on this trailer* Use steel tarp bows, Install center crank holder lower on top of rear skirt, install an extra crank holder on the left hand side of the rear ladder, install 4 alum braces on each header, silver trim, aluminum kingpin section, subframe and bolster, 28" pin setting. Neway CBX23 Air ride, ADDED: SAF-HOLLAND DISC BRAKES, Hubdometer LF hub, Mobilith 007 semi-fluid grease in hubs, 14:00 x 22.5 Accuride aluminum wheels, one row of 7 lights per side, one row of 7 lights across front header, evenly spaced, mount mid turns above rail in the old style alum bracket, Top rear header, middle 3 lights are close spaced to form ID lite group, High mounted stop/turn/tail lights also act as id lights, snow vent cover in the nose, not on the rear, 4S2M abs, Scale box, dump valve, Right Weigh 250-54-1 gauge that reads out in LBS, Install 5 step on each end slope, mount on the ladder side and leave 28" between the step and the trailer side so a broom can pass through (SEE PRIINT), install catwalks 30" down from the top of the top, Install full aluminum fenders, Plumb for a scale computer with a 1/4" air line, ends in a quick connector on the nose, PSI tire inflation system set at 100 PSI, Install a tee on the output of regulator box and install tire valve to check tire pressure, Shorten landing gear 3", Install 1 tee on each hopper side panel, 6" up from the trap frame, also install 1 tee on the front of the front hopper and rear of rear hopper, fastened directly to inside step, *MOVE DOWN 6", Install one large vibrator on each end slope, add a "JUMBO" lubricator only, install on drivers side, Michelin 445/50R22.5 XTE Energy One Supers, center divider to include tarp bow

Aluminum

Manual

Yes

Manual

Air Ride

Tandem

13.67 m

222.25 cm

132.08 cm