All(23)
VND 1.239.386.957 ₫
Machine Location:high 25 airport rdGreenfield, Iowa, USA 50849(Opens in a new tab)
Seller Information
View Seller InformationFarmada
Contact:Darren Zerr
Phone:+1 785-760-7717
Salina, Kansas, USA 67401
General
Year
2021
Manufacturer
FARMADA
Hours
8
Model
ELXIR 66-5HD
Serial Number
1005
Condition
Used
Description
50ft, 20-row Farmada toolbar with Raven cooler and 2-section shut-off.
This is a manufacturer owned demo unit used for sales and marketing purposes - The video under the images is of this exact unit.
Specifications:
Row units are ShieldAg row units in the Split Mount style with coulters on the front of the toolbar and the shanks mounted on the rear.
Front coulters are 20” smooth coulters. Shank mount comes with double spring in a spring design with 880 lbs of pre-load. Shank trip is set up to be linear with a gradual increase in pressure rather than a sudden trip. This reduces risk of knife breakage when shank resets itself after a trip. That is where the knives typically get damaged.
Shanks are edge bent shanks.
Double sealers are set up with 18” double sealer blades. Sealer blade pivots have greasable Timpken bearings to extend the life of the assembly.
Sealers are tightened with flanged nuts and sealer arms are braced to allow sealers to operate in a standard position or a reverse (berm building) style.
The row units are set up with 30” row spacing. The toolbar itself has 4 x 385/65R22.5 transport tires set up in pairs of 2 on each side of the center section. Each pair is arranged on an oscillating pivot point. This gives the operator the performance of tandems in the field without the jerkiness during road transport.
Oscillating axles allow tires to spread the load out evenly on crowned roads to minimize wear.
The toolbar has hydraulic single point depth control.
Flex up and down from center section to primary wings is 20 degrees each way for a 40-degree range.
Flex from the primary wing to the secondary wing is 15 degrees up and 10 degrees down.
Total up flex is 96" and total downflex is 88".
Toolbar is made with 6”x6” steel tubing with the center section being ½” thick and the wing sections being 3/8” thick tubing.
Anhydrous Ammonia, Anhydrous, Anhydrous Ammonia Toolbar, Anhydrous Ammonia bar, Anhydrous Ammonia Fertilizer Bar, Anhydrous Ammonia Fertilizer Toolbar, Anhydrous Ammonia Applicator, Anhydrous Ammonia Fertilizer Applicator, Anhyrdous Ammonia Fertilizer Applicator Bar, NH3 bar, NH3 toolbar, NH3 Fertilizer Toolbar, NH3 fertilizer Applicator,
Fertilizer Bar Row Unit, Fertilizer Row Units, Row Units, NH3 row units, anhydrous row units, anhydrous ammonia row units, ShieldAg row units, ShieldAg NH3 row units, ShieldAg CS row units, ShieldAg Split Mount row units, ShieldAg shanks, ShieldAg shank row units, Edge Bent shanks, dry fertilizer shank row units, fertilizer shanks, liquid fertilizer shanks, liquid fertilizer row units, NH3 fertilizer row units
Upgrade fertilizer toolbar, rebuild fertilizer toolbar, Farmada toolbars, Farmada anhydrous toolbar, Elxir66, Elxir 66, Elxir, Elxir64, Elxir 64,
Blu-Jet LandRunner
Blu-Jet Legacy
Dalton DW series
Dalton shadow series
Case NutriPlacer
John Deere 2430C
Farmada Elixir
Farmada Elxir
Farmada toolbar
Nutrient applicator
Nutrient application
Anhydrous Ammonia, Anhydrous, Anhydrous Ammonia Toolbar, Anhydrous Ammonia bar, Anhydrous Ammonia Fertilizer Bar, Anhydrous Ammonia Fertilizer Toolbar, Anhydrous Ammonia Applicator, Anhydrous Ammonia Fertilizer Applicator, Anhyrdous Ammonia Fertilizer Applicator Bar, NH3 bar, NH3 toolbar, NH3 Fertilizer Toolbar, NH3 fertilizer Applicator,
Fertilizer Bar Row Unit, Fertilizer Row Units, Row Units, NH3 row units, anhydrous row units, anhydrous ammonia row units, ShieldAg row units, ShieldAg NH3 row units, ShieldAg CS row units, ShieldAg Split Mount row units, ShieldAg shanks, ShieldAg shank row units, Edge Bent shanks, dry fertilizer shank row units, fertilizer shanks, liquid fertilizer shanks, liquid fertilizer row units, NH3 fertilizer row units
Upgrade fertilizer toolbar, rebuild fertilizer toolbar, Farmada toolbars, Farmada anhydrous toolbar, Elxir66, Elxir 66, Elxir, Elxir64, Elxir 64,
Category Specific
Number of Knives
20
Weights & Dimensions
Width
15.24 m
Spacing
76.2 cm
Length
60.71 cm
Height
34.54 cm