TAMROCK EJC210

TAMROCK

EJC210

SERIAL NUMBER

Used

1377017

Tamrock EJC 210 6-Yard Scooptram Make: Tamrock Model: EJC 210 Type: Scooptram Capacity: 6.0 Yards (4.6m³) Payload: 9,500 Kg (21,000 Lbs.) Condition: Used, Reported in Good Condition Diesel Engine: Detroit S50 Brake System: LCB Powertrain: Clark Electrical System: 24 Volt Tires: 17.5-25 General Model Specifications: Capacities: Tramming Capacity: 9,525 kg (21,000 lbs.) Breakout Force, Lift: 97 kN (9,910 kg) (21,850 lbf) Break Out Force, Tilt: 143.5 kN (14,628 kg) (32,250 lbs.) Tipping Load: 25,174 kg (55,500 lbs.) Buckets: 3.8 - 5.3 m³ (5.0 - 7.0 yd³) Bucket Motion Times: Raising Time: 5.5 sec. Lowering Time: 4.0 sec. Tipping Time: 5.0 sec Standard Engine: Diesel Engine: Detroit Diesel Series 50 DDEC Output: 186kW (250HP) @2,100 RPM Torque: 1058 Nm (780 lbf-ft) @1,350 RPM Number of Cylinders: Inline 4 Displacement: 8.5 L (519 in³) Cooling System: Liquid Cooled Combustion Principle: Turbocharged, Aftercooled, Direct Injected, 4-Cycle Air Filtration: Donaldson, Dry Type Electric System: 24 V Exhaust System: ECS Catalytic Purifier with Silencer Standard Converter: Clark C5402, Single-Stage, Stall Torque Ratio: 3.14-1 Offset Ratio: 1.0-1 Transmission: Clark 4421 4-Speed Forward and Reverse with Modulation Standard Axles: Front Axle: Clark 19D2748, Posi-Torq Differential, Fixed Rear Axle: Clark 19D2748 No-Spin Differential, Oscillating ± 10° Weights: Operating Weight: 25,084 kg (55,300 lbs.) Total Loaded Weight 34,609 kg (76,300 lbs.) Axle Weights without Load: Front Axle: 10,070 kg (22,200 lbs.) Rear Axle: 15,014 kg (33,100 lbs.) Axle Weights with Load: Front Axle: 24,358 kg (53,700 lbs.) Rear Axle: 10,251 kg (22,600 lbs.) Main Dimensions: Total Length: 9,957mm (392in) Width Without Bucket: 2,565mm (101in) Max Width: 2,718mm (107in) Height with Safety Canopy: 2,311mm (91in) Location: Mexico

25,083.66 kg

Enclosed

186.42 kw