2024 ROME TBW24 New Peralatan Pengolahan Tanah Tipe Cakram untuk dijual2024 ROME TBW24 New Peralatan Pengolahan Tanah Tipe Cakram untuk dijual
    2024 ROME TBW24 New Peralatan Pengolahan Tanah Tipe Cakram untuk dijual2024 ROME TBW24 New Peralatan Pengolahan Tanah Tipe Cakram untuk dijual
    Photos(2)

    2024 ROME TBW24

    Peralatan Pengolahan Tanah Tipe Cakram
    Hubungi untuk info harga 

    Informasi Penjual

    Rome Plow Company

    Kontak:Steve Ireland

    Cedartown, Georgia, AS 30125

    visit our website (Opens in a new tab)

    General

    Tahun
    2024
    Produsen
    ROME
    Model
    TBW24
    Kondisi
    Baru
    Deskripsi
    Wheel Offset Disk Harrow - This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. 11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings. 24 Disks, 69-94 Suggested Engine HP, 223lbs (101kg) Weight Per Disk, 5360lbs (2431kg) Net Weight. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. FEATURES: • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • High gang carrier design to prevent trash build up and clogging. • Levels, cuts, and mixes to full working depth. • Combines ease of maneuverability with high strength for the most adverse conditions. • Up to 277lbs (126kg) of weight per disk blade depending on model with an average of 240lbs (109kg). • Up to 9” (229mm) maximum depth of penetration with standard 26” (660mm) diameter disk blades. • Equipped with Timken dual tapered roller bearings. • Adjustable disk blade scrapers. • Dual purpose transport unit for transportability and penetration control. STANDARD EQUIPMENT: • Adjustable disk blade scrapers. • 26” (610mm) diameter x 5/16” (8mm) thick; cutout (notched) deep concavity disk blades. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • New industrial tires – 2 each. TBW-16: 7.5 x 16 – 6 ply. TBW-20 and TBW-24: 7.5 x 16 – 10 ply. TBW-32: 12.5L x 15 – 12 ply. TBW-40: 16.5L x 16.1 – 10 ply. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Two heavy duty gang wrenches. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) deep concavity disk blades. • Drawbar with track type clevis. • Cylinder rod stops for positive depth control adjustment.

    Weights & Dimensions

    Lebar
    3.05 m