2024 ROME 4250-53WF

2024

ROME

4250-53WF

Baru

Wheel Offset Disk Harrow - For Use w/ Tractors in the 487-542hp Range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for model 4250-35. Two rear tractor hydraulic circuits required for models 4250-49-WF and 4250-53-WF 12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings. 53 Disks, Width of Cut: 26'-6", Transport Width: 15'-6", 462lbs (210kgs) Weight Per Disk, 24460lbs (11095kgs) Net Weight FEATURES: • Both rigid and folding models are designed to give excellent uniform tillage in all stubble plowing situations. • Main frame and gang carriers constructed of high strength tubular steel that is welded for maximum strength and durability. • Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport. • Transport position allows approximately 12” (305mm) ground clearance. • Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs. • Equipped with Timken dual tapered roller bearings. • Up to 462lbs (210kg) of weight per disk blade depending on model with an average of 444lbs (201kg). • Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades. STANDARD EQUIPMENT: • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades. • Heat treated alloy steel gang axles. • Heavy duty fabricated steel spacer spools. • Bearing wear plates. • Furrow filler disk group. • Adjustable disk blade scrapers. • Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected. • New industrial tires – 4 each. 4250-35 and 4250-49-WF: 12.5L x 15. 4250-53-WF: 16.5L x 16.1. • Hardened pins and bushings. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Cylinder rod stops. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • 32” (813mm) diameter x 3/8” (10mm) thick; dura-faced cutout (notched) shallow concavity disk blades. • Heavy duty bearing wear plates. • Rear hitch assembly. • Rear hitch hydraulic group.