価格はお問い合わせください
売主に関する情報
View Seller InformationGeneral
年式
2023
メーカー
TORO
モデル
39678
Hours
0
状態
新品
時間メーター
正確/確かめ
動作条件
動作可能
説明
Please call for current pricing & availability
Toro 48" Fixed Deck Gear Drive T-Bar (50 State) (39678)
14.5 HP Kawasaki® FS481V 603cc Engine with 48" (122 cm) TURBO FORCE cutting technology deck. Model shown 30698.
Highlights
48" (122 cm) TURBO FORCE 7-gauge deck w/patented adjustable baffle
14.5 HP Kawasaki® FS481V 603cc
Exclusive T-Bar steering controls - easy to use and reduces fatigue
Features
T-Bar Steering Controls: Exclusive Toro T-Bar steering system is easy to use and ergonomically designed to reduce operator fatigue. Great for tracking in large open spaces and also maneuvering around obstacles. All around an intuitive control system.
Exclusive TURBO FORCE Deck: High-capacity 7/10 guage TURBO FORCE deck delivers unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Easily handles the most demanding conditions and resists damage from impacts and abrasion.
Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
Patented Adjustable Baffle: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
Rugged Spindle Assembly: Rigorously tested to ensure that it can survive impacts that would destroy lesser spindles. The cast iron housing, with a massive 9-3/8" (23.8 cm) diameter base, absorbs impact loads and distributes them across a broader area of the robust deck shell. Built with maintenance-free sealed ball bearings.
Extended Life Drive System: Extended life drive system with Husqvarna Peerless 700 series transmission, featuring a 9-spline drive coupler.
A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Specifications
Engine: 14.5 hp Kawasaki® FS481V 603cc
Fuel Capacity: 5 gallons (19 L)
Cutting Width: 48" (122 cm)
Height of Cut: 1" to 4-1/4" in 1/8" increments (2.5 cm to 10.8 cm in 3mm increments)
Number of Blades: 3
Starter: Recoil
Drive System: 5-Speed Transmission
Mulch, Bag, Side Discharge: Side-discharge standard
Air Filter: 2-Stage Air Cleaner
Adjustable Discharge: Standard
Blade Tip Speed: 18,500 ft/min (5,639 m/min)
Brake System: 6" (15 cm) Band Brakes
Caster Tires: 9" x 3.50-4" (23 cm x 9 - 10 cm)
Deck Design: 48" (122 cm) TURBO FORCE
Discharge Chute: High-performance 5/16" (8 mm) rubber
Drive Tires: 13" x 6.50-6" (33 cm x 15.2 - 16.5 cm)
Ground Speed: 6.2 mph (10 km/h) fwd; reverse assist
Height: 41" (104 cm)
Length: 72.3" (182 cm)
Spindle Housing: Cast iron with 9-3/8" (24 cm) base
Steering Controls: T-Bar
Width: 49.6" (126 cm)
Weight: 498 lbs (226 kg)
NOTES:
*The gross horsepower of this engine was laboratory rated by the engine manufacturer in accordance with SAE J1940. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.
Capacities
燃料容量
18.93 L
Category Specific
切断幅
121.92 cm
Minimum Cut Height
2.54 cm
Maximum Cut Height
10.8 cm
ブレード数
3
Powertrain
馬力
10.81 kW
Automated Transmission Type
Manual
エンジン
エンジンメーカー
KAWASAKI
燃料の種類
Gas
Shipping Dimensions
運送長さ
183.64 cm
運送幅
125.98 cm
運送高さ
104.14 cm
運送重さ
225.89 kg