USD $7,799
Machine Location:6575 NE 14th StreetDes Moines, Iowa, アメリカ 50313(Opens in a new tab)
売主に関する情報
View Seller Information
General
年式
2023
メーカー
EXMARK
モデル
RAE708GEM60300
状態
新品
Warranty
はい
動作条件
動作可能
説明
2023 Exmark Radius E-Series 60" Exmark, 24.5 HP
Blade Spindles: No maintenance, sealed and non-greaseable spindles; 7.30 in.-diameter cutter housing contains 17mm (.67 in.) diameter spindle shaft and hex blade drive.
Drive Tires: 22 x 10.5-12 K500
Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Bushings
Caster Forks: .375 in. thick caster yoke arms
Tractor Frame: Unibody, welded, heavy-duty 2 in. X 3 in. rectangular tubular steel.
Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Parking Brake: Lever-actuated pawl brake.
Seat: High back seat with foam padded seat cushion, armrests and integral safety switch
Electrical: 12-volt battery with 15-amp alternator.
Standard Features: Engine hour meter, cup holder, tow hitch and jack receiver
POWER COMPONENTS
Engine Brand: Exmark
Engine Model: LC2P77F
Engine Displacement: 708
Engine Series: V-Twin
Fuel System: Carbureted
Engine Speed: 3,600 rpm
Air Filter: Standard Engine Manufacturer's air filter
Fuel Type: Gas Carbureted
Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
Fuel Indicator: Translucent Visual
Drive: Hydro-Drive
Drive Description: Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Speed: Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse.
Carb Compliant: No
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS: 2-post foldable ROPS standard with seat belt and latch.
PTO Engagement: MagStop electromagnetic 125-ft-lb clutch
Drive Wheel Release: Allows unit movement without engine running.
Engine Spec: K5045
DECKS
Width / Cutting Deck: 60 in.
Deck Style: Floating Deck
Deck Style Description: Full-floating Ultra Cut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Blade Tip Speed: Approximately 18,500 fpm.
Cutting Heights: 1.5 in. (3.8 cm) to 5.0 in. (12.7 cm) in 0.25 in. (.6 cm) increments, adjustable from operator's seat.
Blades: 3 Blades at 20.50 in. Length
DIMENSIONS
Width: 72.3 in. (183.6 cm)
Length: 82.2 in. (208.8 cm)
Height: 69.7 in. (177.0 cm)
Curb Weight: 901
Capacities
燃料容量
26.5 L
Category Specific
Mower Type
Commercial
切断幅
152.4 cm
Minimum Cut Height
3.81 cm
Maximum Cut Height
12.7 cm
PTO Engagement
Electric
ブレード数
3
Deck Location
Mid-Mount
Deck Discharge Type
サイド
Deck Construction
Fabricated
Deck Lift System
Mechanical
Operator Controls
Lap Bars
Chassis
Caster Wheel Tread
Smooth
Tweel Tires
はい
Exterior
ROPS
はい
Powertrain
馬力
18.27 kW
Transmission Type
Hydro
Forward Speed
8
エンジン
エンジンメーカー
EXMARK
燃料の種類
Gas