2021 CATERPILLAR 315 GC

2021

CATERPILLAR

315 GC

1,500

FTY00294

中古

Excellent Cat 315 GC Auxilliary Hydraulics  Cat Coupler Rear View Camera Keyless Start Heated Seat Excavating Bucket (some damage to floor) Paint and tinware very good All lights and gauges functioning  SPECIFICATIONS ENGINE Net Power - ISO 9249 98 hp Engine Model Cat C3.6 Engine Power - ISO 14396:2002 100 hp Engine Power - ISO 14396 (DIN) 101 hp (metric) Net Power - ISO 9249 (DIN) 100 hp (metric) Bore 4 in Stroke 5 in Displacement 220 in³ Biodiesel Capability Up to B20¹ Emissions Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards Note (1) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. Note (2) ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. HYDRAULIC SYSTEM Main System - Maximum Flow 247 L/min (65 gal/min) Maximum Pressure - Equipment 5075 psi Maximum Pressure - Travel 5075 psi Maximum Pressure - Swing 3770 psi SWING MECHANISM Swing Speed 11.5 r/min Maximum Swing Torque 25815 ft·lbf WEIGHTS Operating Weight 34000 lb SERVICE REFILL CAPACITIES Fuel Tank Capacity 49.4 gal (US) Cooling System 4 gal (US) Engine Oil 2.1 gal (US) Final Drive - Each 0.8 gal (US) Hydraulic System - Including Tank 22.5 gal (US) Hydraulic Tank 19 gal (US) DIMENSIONS Boom Reach 4.65 m (15'3") Stick Reach R3 m (9'10") Bucket GD 0.53 m³ (0.69 yd³) Shipping Height - Top of Cab 9.2 ft Handrail Height 9.4 ft Shipping Length 24.6 ft Shipping Length - with Blade 26.5 ft Tail Swing Radius 5.1 ft Counterweight Clearance 2.9 ft Ground Clearance 1.4 ft Track Length 12.3 ft Length to Center of Rollers 10 ft Track Gauge 6.5 ft Transport Width 8.8 ft WORKING RANGES & FORCES Maximum Digging Depth 19.6 ft Boom Reach 4.65 m (15'3") Stick Reach R3 m (9'10") Bucket GD 0.53 m³ (0.69 yd³) Maximum Reach at Ground Level 28.5 ft Maximum Cutting Height 31.7 ft Maximum Loading Height 23.6 ft Minimum Loading Height 6.8 ft Maximum Depth Cut for 2440 mm (8 ft) Level Bottom 19.1 ft Maximum Vertical Wall Digging Depth 17 ft Minimum Working Equipment Radius 7.3 ft Bucket Digging Force - ISO 22180 lbf Stick Digging Force - ISO 13330 lbf AIR CONDITIONING SYSTEM Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 hg of refrigerant which has a CO2 equivalent of 1.144 metric tonnes.

1

はい

はい

はい

はい

Zero

はい

はい

はい

90

スチール

スチール

はい

Enclosed

LED

はい

Excellent

はい

はい

はい

はい

USA Tier 4 Final