2024 ROME 2250-53WF

2024

ROME

2250-53WF

新品

Wheel Offset Disk Harrow - For Use with Tractors in the 329-365hp Range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for model 4250-35. Two rear tractor hydraulic circuits required for models 4250-49-WF and 4250-53-WF 11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings. 53 Disks, 16 Bearings, Width of Cut: 22'-8", Transport Width: 13'-6", 248lbs (112kgs) Weight Per Disk, 13144lbs (5962kgs) Net Weight FEATURES: • Uniquely designed harrow is available in five rigid and four wing fold models. Harrows are ideally suited to give excellent uniform tillage results in all light plowing applications. • Mainframe, wings, and gang carriers constructed of tough high strength tubular steel for maximum strength and durability. • Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport. • 10” (254mm) ground clearance with standard 28” (711mm) diameter disk blades. • Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs. • Up to 9” (229mm) maximum depth of penetration with standard 28” (711mm) diameter disk blades. • Equipped with Timken dual tapered oil bath roller bearings. • Standard bearing wear plates help protect the bearing housing from the wear caused by abrasive soils, extending their service life and decreasing cost. STANDARD EQUIPMENT: • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) shallow concavity disk blades. • Heat treated alloy steel gang axles. • Heavy duty fabricated steel spools. • Heavy duty bearing wear plates. • Tapered gang assemblies. • Adjustable disk blade scrapers. • Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected. • Four dual 12L x 15 farm highway service tires for transporting, plowing, and turning. • Hardened pins and bushings on all pivot points. • Drawbar jack stand and safety chain. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. OPTIONAL EQUIPMENT: • 28” (711mm) diameter x 5/16” (8mm) thick; cutout (notched) front and smooth (round) rear shallow concavity disk blades. • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) front and rear shallow concavity disk blades. • 30” (762mm) diameter x 3/8” (10mm) thick, disk blades available in all 28” (711mm) configurations. • Rear hitch assembly. • Rear hitch hydraulic group. • Extra heavy duty wear plates with 1/4” (6mm) hard plate overlay. 29 Disks, 8 Bearings,