2024 ROME TACW10

2024

ROME

TACW10

Used

Wheel Offset Disk Harrow - For Use with Tractors in the 95-120hp Range. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. 17-3/4” (450mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings. 10 Disks, 612lbs (278kgs) Weight Per Disk, 6120lbs (2776kgs) Net Weight. FEATURES: • For deep plowing, plowing in heavy trash, mixing and aerating. • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • High gang carrier design to prevent trash build up and clogging. • Combines thorough mixing and aerating with easy maneuverability and transportability. • Up to 625lbs (284kg) of weight per disk blade depending on model with an average of 582lbs (264kg). • Up to 10” (254mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades. • Equipped with Timken dual tapered roller bearings. • Adjustable disk blade scrapers. • Dual purpose transport unit for transportability and penetration control. STANDARD EQUIPMENT: • 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) deep concavity disk blades. • Adjustable disk blade scrapers. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • New industrial tires – 2 each. TACW-10 thru TACW-16: 12.5L x 15 – 12 ply. TACW-20: 16.5L x 16.1 – 10 ply. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Two heavy duty gang wrenches. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • Cylinder rod stops for positive depth control adjustment.