USD $29,119
Machine Location:2292 Yellow Brick RdBeavercreek, Ohio, USA 45434(Opens in a new tab)
Seller Information
Jeff Schmitt Lawn & Motor Sports
Contact:Tim Terrill
Phone:+1 937-358-7168
Beavercreek, Ohio, USA 45434
General
Year
2022
Manufacturer
LAND PRIDE
Model
AFM4214
Serial Number
1681019
Condition
New
Stock Number
L1681019
Description
Discharge type Rear Blade spindle speed 3362 rpm
Cutting width 14'-0" (4.52 m) Blade tips speed 18396 fpm (5607 mpm)
Overall width 14'-3" (4.34 m) Blade drive belt 1 B-section
Transport height 7'-7 1/2" (2.32m) Drive belt tension 1 1/4" (3.2 cm)
Transport width 7' - 11" (2.41m) Blade bearing Sealed Ball Bearings
Overall length 14'-10" (4.52 m)Mowing position
12'-11" (3.94 m)Transport position Blade overlap Spring loaded idler with over-center
release
Weight W/15" tires = 3,000 lbs.
W/18" tires = 3,150 lbs.
Blades
3 each per deck
Low lift (5/16" x 2 1/2" x 20 29/32")
Optional blades:
Medium lift, high Lift & mulching
Tractor horsepower Minimum 40 hp (30 kW)
Maximum 70 hp (52 kW) Cutting height 3/4" to 5 1/4" (In 1/4" increments)
2 cm to 13 cm (in 6 mm increments)
Hitch Pull type with adjustable clevis and
safety tow chain Deck tires 10 Each, air tires with sealant
18 x 9.5 or 15 x 6.6
Tongue support 2,200 lb (1000 kg) capacity screw jack Deck wheel spindles 1 1/4" (3.2 cm) With nylon bushings
Gearbox support 3/8" Steel channel Transport tires 2 each, 23 x 10.5 with sealant
Gearboxes 540 rpm (1)-splitter & (3)-wing Transport locks Automatic with pull rope release
Gearbox lubrication Gear lube 80-90W EP Turning radius Zero turning radius
Gearbox oil capacity
3 - Wings: 3.5 pints (1.7 L)
SD splitter: 2.125 pints (1.0 L) or
OMNI splitter: 2.5 pints (1.2 L)
Mowing capacity
@mph= Acres/hour
@km/hr= Hectares/hr
@ 2 mph = 3.4 @3 km/h = 1.3
@ 4 mph = 6.8 @6 km/h = 2.5
@ 6 mph = 10.2 @10 km/h = 4.3
Anti-scalp roller Front center and
outside deck corners Wing deck flex 23 Degrees left to right
22 Degrees front to back
Main driveline (1) Cat. lV constant velocity
with slip clutch Center deck flex 10 Degrees left to right
22 Degrees front to back
Deck drivelines (3) Cat. II Hydraulic outlets 1 Set required
Deck size & quantity 3 each / 60" (1.52 m) Deck cylinders Dual acting
Deck overlap 6" (15 cm) Gauge wheel arms 1/4" (6 mm) Wall square tubing
Deck thickness 3/16" (5 mm) Signal lights
7 Pin connector
LED (light-e