2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    2020 CK POWER 50 KW Used 拖式发电机2020 CK POWER 50 KW Used 拖式发电机
    照片(8)

    2020 CK POWER 50 KW

    拖式发电机
    USD $76,154 

    GENERAL EQUIPMENT & SUPPLIES INC

    联系人:Sales Department

    Fargo, North Dakota, 美国 58103

    常规

    年限
    2020
    制造商
    CK POWER
    型号
    50 KW
    序列号
    PE4045U076110
    状况
    二手
    库存号
    E00059565
    描述
    CK POWER FINAL TIER 4, 50KW PRIME RATED GENERATOR SET EQUIPPED AS FOLLOWS: - JOHN DEERE 4045TFG03 ENGINE - 4 CYCLE / TURBOCHARGED / AIR COOLED - 4 CYLINDER - HEAVY DUTY AIR CLEANER - ALTERNATOR SPECS - 4-POLE, ROTATING-FIELD - BRUSHLESS EXCITER W/ PMG - FLEXIBLE DISC COUPLING - TRAILER - DOT APPROVED - DUAL AXLE TRAILER WITH ELECTRIC BRAKE SYSTEM. - FRONT TONGUE JACK. - REAR STABILIZER TRAILER JACKS. - CONTROL PANEL - DEEP SEA 7310 CONTROL PANEL WITH FINE VOLTAGE ADJUST - FUEL & DEF TANKS - 24-HOUR SUB BASE FUEL TANK AT PRIME RATING (APPROX 100 GALLONS) - FUEL LEVEL GAUGE. - ENCLOSURE: - 69DB (A) LOG AVERAGE @ 7M WITH FULL LOAD AT PRIME RATING. - STAINLESS STEEL HINGES AND LOCKABLE LATCHES. - SINGLE POINT LIFTING EYE. - CONNECTIONS: - CAM-LOCK TYPE CONNECTION TERMINALS - STANDARD FEATURES: - BATTERY, BATTERY RACK & BATTERY CABLES - ENGINE OIL & COOLANT - BLOCK HEATER - ALTERNATOR PROTECTION - GROUNDING PLATES SHIPPED LOOSE - ELECTRICAL DISTRIBUTION PANEL EQUIPPED AS PER BELOW: - 200 AMP MAIN BREAKER - QTY. (3) 60 AMP BREAKER 480V - 7.5 KVA TRANSFORMER 480V TO 120V - QTY. (4) 20 AMP GFI RECEPTACLES - DISTRIBUTION BLOCK - OFF OF 200 AMP BREAKER - 15' OF POWER CORD WITH MALE BROWN, GREEN, ORANGE, YELLOW TWIST LOCKS - GUARDING: FOR DRIVE AND TAIL PULLEYS, V-BELT DRIVE AND RETURN IDLERS. GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED.