2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    2021 ALAMO TRAXX RC56 Used 其他户外动力设备2021 ALAMO TRAXX RC56 Used 其他户外动力设备
    照片(6)

    2021 ALAMO TRAXX RC56

    其他户外动力设备
    USD $69,900 

    MB Tractor & Equipment

    联系人:Sales Dept - Tilton

    访问我们的网站 (Opens in a new tab)

    常规

    年限
    2021
    制造商
    ALAMO
    型号
    TRAXX RC56
    序列号
    M2167072
    状况
    二手
    库存号
    189385
    描述
    2021 TRAXX™RC56 Hours as of 10/17/24: 55 *Machine is an active rental, hours +/- The Traxx RC56 remote-control slope-mower thrives in challenging, hazardous and confined areas perfect for tackling vegetation in the toughest terrain that other mowers cannot reach. These slope mowers take on up to 55 degrees with ease, and their 500ft remote control range puts operators out of harm’s way. TRAXX™RC75 enables you to work SAFER, FASTER and SMARTER than ever before. Engine 56 hp Working range 500 ft Weight 2,650 lb (Without Attachment) Overall Length 90 in (Without Attachment) Overall Width 51 in Overall Height 41 in Fuel Tank Capacity 10 gal HYDRAULICS Oil Tank Capacity 5.3 gal (10.6 gal held in system) of biodegradable oil Attachment Lift Capacity 1,200 lb Independent Intercooler Standard Independent Track Drive Circuit 2x Closed Circuit Piston Independent Flail Head Circuit Closed Circuit Piston TRACKS Rubber Optional ~ max working angle 40° Rubber with Steel Cleats Standard ~ max working angle 55° Self-Tightening Standard PERFORMANCE Potentiometer Speed Control (0 to 100%) 1st gear (low range) Forward and back 0 - 2.2 mph 2nd gear (low range) Forward and back 0 - 4.3 mph FIELD HEAD ATTACHMENTS Rotor speed 3,300 RPM Front and Rear Flaps Standard Flails Y - Flails for cutting grass and brush J (hammer) - Flails for cutting brush & sapling Rotor width 51 in to 75 in Cutting height range .79 in. - 3.35 in. (5 positions) (via roller adjustment) Flail head can be lifted to cut higher Hydraulic lift -11.8 in to +15.7 in