2021 JOHN DEERE Z930M Used 零转弯割草机2021 JOHN DEERE Z930M Used 零转弯割草机
    2021 JOHN DEERE Z930M Used 零转弯割草机2021 JOHN DEERE Z930M Used 零转弯割草机
    2021 JOHN DEERE Z930M Used 零转弯割草机2021 JOHN DEERE Z930M Used 零转弯割草机
    2021 JOHN DEERE Z930M Used 零转弯割草机2021 JOHN DEERE Z930M Used 零转弯割草机
    照片(4)

    2021 JOHN DEERE Z930M

    零转弯割草机
    USD $6,350 

    Great Plains Kubota - Duncan

    联系人:Chad Jackson

    Duncan, Oklahoma, 美国 73533

    常规

    年限
    2021
    制造商
    JOHN DEERE
    型号
    Z930M
    小时
    330
    序列号
    100222
    状况
    二手
    库存号
    0101A058051
    运行条件
    可运行
    描述
    2021 John Deere Z930M 7-Iron™ PRO deck Mulch On Demand™ Available Gasoline Engine Rear Discharge Deck Propane Option Available Engine Manufacturer/model: FX801V Engine Power: Gross at 3,600 rpm / 25.5 hp / 19 kW Fuel tank capacity: 11.5 U.S. gal. / 43.5 L Mower deck Size: 54, 60 in. / 137, 152 cm Blade tip speed: Approximately 18,000 fpm / 60 in. rear discharge: approximately 15,000 fpm Transmission: Hydrostatic Speed range: 0-10 mph / 0-16.1 km/h Drive wheels: 24x12-12 Caster wheels: 13x6.5-6 Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation Engine Manufacturer/Model: FX801V Power: Gross at 3,600 rpm / 25.5 hp / 19 kW Displacement: 52 cu in. / 852 cc Cylinders: Two Crankcase capacity: With filter, 2.4 U.S. qt / 2.3 L Oil filter: Full flow, replaceable Lubrication: Full pressure Cooling: Air Air cleaner: Pre-cleaner / Yes / Heavy-duty canister type with safety element Fuel System Fuel type: Gasoline Fuel consumption: Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr / 4.2-7.2 L/hr Fuel tank capacity: 11.5 U.S. gal. / 43.5 L Fuel tank switch/shut-off valve: Yes Electrical System Charge system: 20 amp Battery voltage: 12 V Cold cranking amp: 300 amp Hour meter: Standard, digital Operator presence starting system: Brake-N-Go (hand) Drivetrain Transmission: Hydrostatic Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor Travel speed: Speed range / 0-10 mph / 0-16.1 km/h / Forward / 0-10 mph / 0-16.1 km/h / Reverse / 0-4.5 mph / 0-7.2 km/h Speed and direction control: Twin levers Hydraulic capacity: 5.9 U.S. qt / 5.6 L Filter: Internal, replaceable Buyer's Note Warranty: 36 months or 1200 hours, whichever comes first / First 24 months, no hour limitation Tires Drive wheels: 24x12-12 Load rating: 4 PR Brakes Dynamic braking: Twin levers Park brake: Internal wet disk integrated in the transmission Park brake actuation: Hand brake PTO Type: Electro-magnetic, 225 lb.-ft / 305 Nm Drive: V-belt Mower Decks Size: 54, 60 in. / 137, 152 cm Deck thickness: 7 gauge / 0.18 in. / 4.6 mm Discharge: Side, Mulch On Demand™ system, rear Height-of-cut range: Increments / 0.25 in. / 0.64 cm / 1-5.5 in. / 2.54-14 cm Cutting width: 54, 60 in. / 137, 152 cm Blades Length: Varies by deck size Thickness: 0.25 in. / 0.64 cm Blade tip speed: Approximately 18,000 fpm / 60 in. rear discharge: approximately 15,000 fpm Number: Three Wheels Caster wheel type: Flat free Caster wheels: 13x6.5-6 Front anti-scalp rollers: RH, center, LH Rear anti-scalp rollers: Standard Dimensions Length: 84 in. / 213 cm Width: With chute down, 68, 74 in. / 173, 188 cm / Rear discharge, 63.5 in. / 161.3 cm Height: With ROPS up, 73 in. / 185 cm / With ROPS down, 47 in. / 119 cm Weight: 1,275 to 1,365 lb. / 578 to 619 kg Operation Rollover protective structure (ROPS): Yes Slope operating limit: 20 degrees (10 degrees with material collection system installed)

    类别特定

    Deck Location
    Mid-Mount
    Operator Controls
    Lap Bars

    Exterior

    驾驶室