JOHN BERENDS TH100

JOHN BERENDS

TH100

新建

Hydraulically folding tandem disc plough - Excellent digging ability - Available in 28, 32, 36, 40, 44 and 48 plate models at 9” disc spacings. - Fitted with 24” x 5mm, 24” x 6mm, 26” x 6mm or 28” x 8mm scalloped discs. All discs are European Bellota Boron discs which carry a lifetime warranty against manufacturing failure. - All models are fitted with hydraulic gang adjustment which allows the gangs to be folded parallel with the main frame to be under 2.4m overall width. - Gangs can also be opened right up to no angle at all when only a fine till of the topsoil is required. - Solid cast spools throughout the gangs provide ballast weight in the gangs, where it counts, rather then the main frame. Each is individually machined to suit the disc for extra strength. - Flanged disc bearings designed specifically for severe tillage applications. The bearings are encapsulated in two case hardened zinc plated stampings. Two nitrile ‘O’ rings are fitted to exclude contaminants and provide a grease seal to ensure lubricant goes directly into the bearing. - Buster tine removes centre ridge to create a level finish. - Integrated furrow fillers are standard. - Fitted with four Land Cruiser wheels on a 5 ton axle. Hydraulic wheel lift is standard. - 40mm square high tensile gang bolts. - Fully adjustable drawbar height with parallel lift for better transportation. - Wheelkit locking arms reduce stress on the hydraulics when transporting. - Australian made Ryco hoses are used with a minimum burst pressure of 20,400 psi. - Australian made Eaton cylinders. - Prong type scrapers are standard -formed scrapers on request. - Parking jack is standard.