致电询价
常规
年限
2024
制造商
ROME
型号
4250-53WF
状况
新建
描述
Wheel Offset Disk Harrow - For Use w/ Tractors in the 487-542hp Range.
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for model 4250-35. Two rear tractor hydraulic circuits required for models 4250-49-WF and 4250-53-WF
12” (305mm) disk spacing; 2-1/8” (54mm) round axles; Equipped with Timken dual tapered roller bearings.
53 Disks, Width of Cut: 26'-6", Transport Width: 15'-6", 462lbs (210kgs) Weight Per Disk, 24460lbs (11095kgs) Net Weight
FEATURES:
• Both rigid and folding models are designed to give excellent uniform tillage in all stubble plowing situations.
• Main frame and gang carriers constructed of high strength tubular steel that is welded for maximum strength and durability.
• Hydraulically controlled transport assembly with cylinder transport locks to pin wheels in raised position to safeguard implement from accidentally falling during transport.
• Transport position allows approximately 12” (305mm) ground clearance.
• Adjustable gang angles of 18°, 20°, and 22° for both front and rear gangs.
• Equipped with Timken dual tapered roller bearings.
• Up to 462lbs (210kg) of weight per disk blade depending on model with an average of 444lbs (201kg).
• Up to 11” (279mm) maximum depth of penetration with standard 32” (813mm) diameter disk blades.
STANDARD EQUIPMENT:
• 32” (813mm) diameter x 3/8” (10mm) thick, cutout (notched) shallow concavity disk blades.
• Heat treated alloy steel gang axles.
• Heavy duty fabricated steel spacer spools.
• Bearing wear plates.
• Furrow filler disk group.
• Adjustable disk blade scrapers.
• Wheel hubs with 2 tapered roller bearings on each hub that are dust and moisture protected.
• New industrial tires – 4 each. 4250-35 and 4250-49-WF: 12.5L x 15. 4250-53-WF: 16.5L x 16.1.
• Hardened pins and bushings.
• Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
• Cylinder rod stops.
• Drawbar jack stand and safety chain.
OPTIONAL EQUIPMENT:
• 32” (813mm) diameter x 3/8” (10mm) thick; dura-faced cutout (notched) shallow concavity disk blades.
• Heavy duty bearing wear plates.
• Rear hitch assembly.
• Rear hitch hydraulic group.