2022 LAND PRIDE AFM4214 New 旋转割草机2022 LAND PRIDE AFM4214 New 旋转割草机
    照片(1)

    2022 LAND PRIDE AFM4214

    旋转割草机
    CNY ¥210,909 
    输入的价格为: USD $29,119

    Jeff Schmitt Lawn & Motor Sports

    联系人:Tim Terrill

    Beavercreek, Ohio, 美国 45434

    常规

    年限
    2022
    制造商
    LAND PRIDE
    型号
    AFM4214
    序列号
    1681019
    状况
    新建
    库存号
    L1681019
    描述
    Discharge type Rear Blade spindle speed 3362 rpm Cutting width 14'-0" (4.52 m) Blade tips speed 18396 fpm (5607 mpm) Overall width 14'-3" (4.34 m) Blade drive belt 1 B-section Transport height 7'-7 1/2" (2.32m) Drive belt tension 1 1/4" (3.2 cm) Transport width 7' - 11" (2.41m) Blade bearing Sealed Ball Bearings Overall length 14'-10" (4.52 m)Mowing position 12'-11" (3.94 m)Transport position Blade overlap Spring loaded idler with over-center release Weight W/15" tires = 3,000 lbs. W/18" tires = 3,150 lbs. Blades 3 each per deck Low lift (5/16" x 2 1/2" x 20 29/32") Optional blades: Medium lift, high Lift & mulching Tractor horsepower Minimum 40 hp (30 kW) Maximum 70 hp (52 kW) Cutting height 3/4" to 5 1/4" (In 1/4" increments) 2 cm to 13 cm (in 6 mm increments) Hitch Pull type with adjustable clevis and safety tow chain Deck tires 10 Each, air tires with sealant 18 x 9.5 or 15 x 6.6 Tongue support 2,200 lb (1000 kg) capacity screw jack Deck wheel spindles 1 1/4" (3.2 cm) With nylon bushings Gearbox support 3/8" Steel channel Transport tires 2 each, 23 x 10.5 with sealant Gearboxes 540 rpm (1)-splitter & (3)-wing Transport locks Automatic with pull rope release Gearbox lubrication Gear lube 80-90W EP Turning radius Zero turning radius Gearbox oil capacity 3 - Wings: 3.5 pints (1.7 L) SD splitter: 2.125 pints (1.0 L) or OMNI splitter: 2.5 pints (1.2 L) Mowing capacity @mph= Acres/hour @km/hr= Hectares/hr @ 2 mph = 3.4 @3 km/h = 1.3 @ 4 mph = 6.8 @6 km/h = 2.5 @ 6 mph = 10.2 @10 km/h = 4.3 Anti-scalp roller Front center and outside deck corners Wing deck flex 23 Degrees left to right 22 Degrees front to back Main driveline (1) Cat. lV constant velocity with slip clutch Center deck flex 10 Degrees left to right 22 Degrees front to back Deck drivelines (3) Cat. II Hydraulic outlets 1 Set required Deck size & quantity 3 each / 60" (1.52 m) Deck cylinders Dual acting Deck overlap 6" (15 cm) Gauge wheel arms 1/4" (6 mm) Wall square tubing Deck thickness 3/16" (5 mm) Signal lights 7 Pin connector LED (light-e