2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    2023 EXMARK RAE708GEM60300 New 零转弯割草机2023 EXMARK RAE708GEM60300 New 零转弯割草机
    照片(6)

    2023 EXMARK RAE708GEM60300

    零转弯割草机
    CNY ¥56,521 
    输入的价格为: USD $7,799

    Mowbility Sales & Service

    联系人:Tim Pol

    Pella, Iowa, 美国 50219

    常规

    年限
    2023
    制造商
    EXMARK
    型号
    RAE708GEM60300
    状况
    新建
    Warranty
    运行条件
    可运行
    描述
    2023 Exmark Radius E-Series 60" Exmark, 24.5 HP Blade Spindles: No maintenance, sealed and non-greaseable spindles; 7.30 in.-diameter cutter housing contains 17mm (.67 in.) diameter spindle shaft and hex blade drive. Drive Tires: 22 x 10.5-12 K500 Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Bushings Caster Forks: .375 in. thick caster yoke arms Tractor Frame: Unibody, welded, heavy-duty 2 in. X 3 in. rectangular tubular steel. Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Parking Brake: Lever-actuated pawl brake. Seat: High back seat with foam padded seat cushion, armrests and integral safety switch Electrical: 12-volt battery with 15-amp alternator. Standard Features: Engine hour meter, cup holder, tow hitch and jack receiver POWER COMPONENTS Engine Brand: Exmark Engine Model: LC2P77F Engine Displacement: 708 Engine Series: V-Twin Fuel System: Carbureted Engine Speed: 3,600 rpm Air Filter: Standard Engine Manufacturer's air filter Fuel Type: Gas Carbureted Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location. Fuel Indicator: Translucent Visual Drive: Hydro-Drive Drive Description: Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. Speed: Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. Carb Compliant: No Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. ROPS: 2-post foldable ROPS standard with seat belt and latch. PTO Engagement: MagStop electromagnetic 125-ft-lb clutch Drive Wheel Release: Allows unit movement without engine running. Engine Spec: K5045 DECKS Width / Cutting Deck: 60 in. Deck Style: Floating Deck Deck Style Description: Full-floating Ultra Cut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. Blade Tip Speed: Approximately 18,500 fpm. Cutting Heights: 1.5 in. (3.8 cm) to 5.0 in. (12.7 cm) in 0.25 in. (.6 cm) increments, adjustable from operator's seat. Blades: 3 Blades at 20.50 in. Length DIMENSIONS Width: 72.3 in. (183.6 cm) Length: 82.2 in. (208.8 cm) Height: 69.7 in. (177.0 cm) Curb Weight: 901

    承载量

    燃料容量
    26.5 L

    类别特定

    Mower Type
    Commercial
    Cutting Width
    152.4 厘米
    Minimum Cut Height
    3.81 厘米
    Maximum Cut Height
    12.7 厘米
    PTO Engagement
    Electric
    刀片数量
    3
    Deck Location
    Mid-Mount
    Deck Discharge Type
    侧面
    Deck Construction
    Fabricated
    Deck Lift System
    Mechanical
    Operator Controls
    Lap Bars

    机壳

    Caster Wheel Tread
    Smooth
    Tweel Tires

    Exterior

    驾驶室

    动力总成

    马力
    18.27 kW
    Transmission Type
    Hydro
    Forward Speed
    8

    发动机

    引擎品牌
    EXMARK
    燃料类型
    Gas