2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    2023 SCHULTE FX1800 New 旋转割草机2023 SCHULTE FX1800 New 旋转割草机
    照片(10)

    2023 SCHULTE FX1800

    旋转割草机
    CNY ¥231,727 
    输入的价格为: USD $31,999

    German-Bliss Equipment

    联系人:Ron Naples

    常规

    年限
    2023
    制造商
    SCHULTE
    型号
    FX1800
    状况
    新建
    小时表
    准确/验证
    Warranty
    描述
    NEW 2023 SCHULTE FX-1800 FLEX WING CUTTER. Our medium duty 15′ flex wing, rotary cutter A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris. 6.5 ” blade overlap and high blade tip speeds. A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP (194kw). The centre and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP (168kw)*. An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service. Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance. Available in 540 or 1000rpm drive. Cutting Width 180 ” (4.57m) Overall Width 190 ” (4.83m) Overall Length 202 ” (5.13m) Transport Width 93” (2.36m) (Singles on wings) 102" (2.59m) (Duals on wings) Transport Height 84"(2.13m) Deck Thickness 7GA (3/16",4.6mm) Weight 5,600 lbs (2540kg) (Depends on configuration) Hitch Weight 1680 lbs (762kg) (Depends on configuration) Minimum Tractor Hp 50 HP (37kW) Recommended Tractor HP 85 HP (63kW) Tractor PTO Speed 540 or 1000rpm Cutting Height 1.75"to 16.75" (44.5mm to 425mm) Ground Clearance 14.75"(42.5mm) Cutting Capacity 4"(101.6mm) Blade Overlap 6.5"(165.1mm) Divider Gearbox Rating 260 HP (194kw) Center & Wing Gearbox Rating 225 HP (168kw)* Output Shaft 2.38"(60.3mm) Blade Tip Speed 540 rpm Center 15980 ft/min (4871m/min) Wing 15459 ft/min (4711m/min) Blade Tip Speed 1000 rpm Center 15974 ft/min (4869m/min) Wing 15708 ft/min (4788m/min) Wing Working Range 25 o down to 87 o up Wing Floating Range 25 o down to 30 o up Drive Size, Main Cat.5CV (1000rpm),Cat.6 CV (540 rpm) Drive Size, Centre and Wings Category 6 Side Skirt Depth & Thickness 13.63" (346mm) & 1/4” (6.35mm) Suspension Rubber gromett 3 puck system Tires Laminate, Aircraft (5 bolt) 22” size

    类别特定

    Mower Type
    Pull-Type
    Flex-Wing

    重量与尺寸

    宽度
    457.2 厘米