2024 SCHULTE XH1500-S5

2024

SCHULTE

XH1500-S5

Pre Selling

新建

MOWS

*New Schulte XH1500 Series 5 Upgrade 15' Cutter (Light kit; wing walking axles; skid steer tires) Ask your salesperson about stock with alternate options. *Pre-Selling New; Extra heavy duty 15 foot; rotary cutter with 240 horsepower Bondioli gearboxes with oil level sight glass and 1-3/4″ input shafts and 3" (75mm) output shaft; Extra heavy duty 275hp divider box Extra heavy duty Bondioli Cat 6 (G8) cutter deck drive lines New high-torque wing clutches ensure better performance in rough cutting All grease points on the main mower body have been eliminated; spring steel greaseable bushings are used only in the walking axles. All other major pivot points are now use maintenance free; fibre wound bushings with 1 1/4″ diameter pins for strength Single domed; sweep clean deck design eliminates excess weight over competitive double-deck designs; eliminates build up of debris and prevents rusting on top side of deck Tandem walking axles result in smooth operation over rough surfaces Increased ground clearance and a cutting chamber depth of 15 3/8" (2″ greater than the Series 4) and an increased blade tip speed; result in an unsurpassed material flow with improved cutting speed Extra large 10.5 X 27 skid steer tires; allow for greater transport height along with improved performance in wet conditions (other options available) The XH-1500 Series 5 incorporates a floating hitch through the use of tension links. These links are connected from the hitch to the rear beam and are allowed to free float in one direction. This system allows the front of the cutter to easily pass over obstacles without causing damages to the tension links or putting unnecessary stress on the deck The hitch is also equipped with a bolt in; replaceable 2 1/4″ swivel which allows for maximum ground contouring without putting unnecessary twisting on the tractor draw bar Hitch options include Schulte's Precision Hitch; a standard clevis and our new Pro Level Hitch Centre suspension reduces stress on tractor draw bar 3/8" thick formed deck protection rings prevent blade to deck contact Double safety chains with individually replaceable links are standard equipment New adjustable and replaceable side skirt with skid shoes that are cast and cupped to reduce scrubbing on tight turns Optional gauge wheel kit can be mounted on the left or right wing to aid in clearing road approaches during ditch mowing New wing lift tower; along with rugged hinge line allow for easier operation & increased strength. The double acting independent wing lift cylinder was designed to put less stress on wings and hinges Phased hydraulic cylinders are standard to provide level lifting across the width of the cutter. Centre and wing sections all raise and lower together. Cutting height is controlled by the centre depth stop for one touch leveling. Cutting width: 180" (4.57m) Overall width: 190" (4.83m) Overall length: 192" (4.88m) Transport width: min 88" (2.24m) Transport height: 88" (2.24m) Weight; approx.: 5800 lbs (2636kg) Minimum tractor HP: 70 HP (52kW) Recommended tractor HP: 90 HP (67kW) Cutting height: 1.5 to 19.25" (38 to 456mm) Ground clearance: 17.5" (444mm) (with 24" tire) Cutting capacity: 5" material (127mm) with brush blade Centre RPM: 848 rpm; 16286 ft/min (4964m/min) Wing RPM: 1002 rpm; 16290 ft/min (4965m/min) Safety Light Kit 1000 RPM CW Super Updraft 5" Blades Skid Steer Tires Optional Wing Walking Axles Pioneer Ends Front Belting Open Clevis Optional: Chemical Application Brush & Weed System; 50 US Gallons (factory installed) Financing and Leasing OAC! Deliveries are available; ask your salesperson for details. Prices are subject to applicable taxes.