2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)
    2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)
    2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)
    2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)2025 CIE 20/40' EXTENDABLE TANDEM New 联运/集装箱拖车(仅底盘)
    照片(4)

    2025 CIE 20/40' EXTENDABLE TANDEM

    联运/集装箱拖车(仅底盘)
    致电询价 

    Nationwide Haul

    联系人:Sales Staff

    访问我们的网站 (Opens in a new tab)

    常规

    数量
    100
    年限
    2025
    制造商
    CIE
    状况
    新建
    库存号
    CIE2040XTLAK
    描述
    20'-40' City CB Tandem-CC402P5DF00 FET NOT INCLUDED IN THIS PRICE Specifications 1. Function Carries one (1) 20' or (1) 40' ISO container Meets all TOFC, AAR, DOT, FMVSS, ISO, ANSI, SAE and TTMA specifications 2. General Overall Length: 40'-8" extended / 30'-6" retracted (Excluded rear bumper) Overall Width: 96" (Over tires) Fifth Wheel Height: 47"±1" Rear Deck Height: 48"±1" Kingpin Location: 24" (From rear face of front bolster) Axle Spread: 49" Tandem Location: 29 1/4" (From rear axle center to rear face of rear bolster) Tare Weight: 7,700 lbs. (±3%) Gross Vehicle Weight Rating: 52,350 lbs for 20' container 71,550 lbs for 40' container 3. Steel Structure & Components Material: High strength GR50,GR80. Painting: E-coat primer (min. 20μm) and Powder coating topcoat (approx. 60μm). 7 years warranty Topcoat color: Black RAL 9005 Main Beam: W12 @ 19lb/ft hot-rolled or fabricated H-beam, ASTM A572 Grade 50 or equivalent. Extension Beam: Fabricated 8-1/4" × 5-1/4" "H" beam with 3/8" thick flanges Locking System: Two (2) air operated locking pins, activation of locking pins through third gladhand on the front bolster. Crossmember: Fabricated channel type not less than 3/16" thick. Upper Coupler: 5/16" thick with 2" dia. drain holes, reinforced by 1/4" thick channel type kingpin supporters. SAF-Holland, Jost or Wallace Forge 2" AAR certificated kingpin Front Bolster: 8" wide × 10" high × 1/4" thick open section, w/ 3-1/2"chamfer in full length for gathering container in operation. One piece corner casting welded on both ends. Center Bolster: 5-7/8" wide × 3/8" thick top plate with 5" wide × 5" deep × 5/16" thick "U" type bottom channel. Rear Bolster: 8" wide × 3/8" thick top plate with 6-7/8" wide × 8" deep × 1/4" thick "U" channel. Rear Bumper: 4" × 4" square type step bar supported by H type posts. Locking Device: Two (2) Buffers 1213 or Toca equivalent front locking pins on front bolster Two (2) Buffers 3843R or Toca equivalent on middle bolster Two (2) Buffers 1207 or Toca equivalent twist locks on rear bolster. Landing Gear: JOST A440 series landing gear with 62,500 lbs capacity,2-speed 17" travel, 10 years warranty. Low profile sand shoe with solid axle. Roadside crank handle. Suspension: Hutchens mechanism tandem suspension with high arch 3-leaf spring 354-00. Axles: Meritor 5" round axles with 22,500 lb capacity, 71-1/2" track with intermediate long 28 spline cam shaft 16 1/2" X 7" Q+ Brake Hub & Drum & Lubricant: Meritor seal, Chevron Delo SF grease with Meritor hubcap 10 stud hub piloted hubs with outboard mounting cast steel drum. Rims: Jingu 8.25 x 22.5 steel, hub-pilot disc wheels with 5 hand holes or Accuride equivalent, White Tires: Westlake 295/75R22.5 tubeless type, 14 ply, CR915 or Ling Long, Goodyear equivalent Brake System: Wabco 2S/1M ABS brake system, spring brake priority Haldex type 3030 2.5" stroke brake chamber or TSE equivalent. Haldex 28 spline, 5.5" automatic slack adjusters or TSE equivalent. Hoosier air tank or Sanborn equivalent Phillips 12-0081/12-0061 gladhand Gladhands should be mounted straight up and down. Electrical: Truck-Lite or Phillips 12 volt LED lighting system with Phillips modular wiring harness. Connectors for GPS and PSI are available in the harness. Phillips harness with integrated Phillips 16-724 receptacle Pintle Hook Available: No Genset Available: No MISC: CIE standard marking Conspicuity tape Document holder 24" x 30" mud flap with CIE logo Option : (Not included, available upon request) PSI tire inflation system, with LED indicator lamp. With Thermo-Alert. Hubodometer, Digital data trac in KM, mounted curbside front axle THE NATIONWIDE HAUL EDGE - We finance All Equipment! Even if you didn't buy from us! - Free Trucking Insurance Quote & Policy review for all Customers - DOT for Life - All equipment we sell gets a free DOT Inspection for lifetime - Extended Warranty options on All Equipment - GAP Insurance & Roadside Assistance is Available - We accept all Trade proposals and pay top dollar! - Free TCS Fuel Card (Save an average of 42 cents Per Gallon)

    机壳

    悬挂
    弹簧
    轮胎
    11R22.5
    后轴数量
    串联
    轴类别
    固定

    重量与尺寸

    长度
    12.19 m
    宽度
    243.84 厘米