2026 EXA T-REX HALF ROUND New 末端式2026 EXA T-REX HALF ROUND New 末端式
    照片(1)

    2026 EXA T-REX HALF ROUND

    末端式
    致电询价 

    IKON TRAILERS

    联系人:Daniel Martinez

    Marion, Texas, 美国 78124

    常规

    年限
    2026
    制造商
    EXA
    状况
    新建
    库存号
    T-REX HALF ROUND
    DOT
    描述
    NEW EXA Half-Round End Dump Hardox - T-Rex 32 Capacity: 26.5 cu. yds. Commodity: Transportation of soil and rocks Dump angle: 46 degrees, with all-tires on the ground Overall Length: 34.5 ft. Height: 10.25 ft. Width: 102 in. Fifth Wheel Height: 4 in. Upper Coupler: Oscillating +/- 10 deg fifth wheel plate with 18" Holland King Pin Weight: 14,590 lbs aprox GVWR: 75,000 lbs Hydraulic Dump Hoist: 8 in., 5-stage inverted trunnion mount. Front-mounted outside of bulkhead. Hydraulic Connector: Quick Hydraulic Connect, 1" NPT 16N, Male Wing Coupler Material: Hardox 450 Steel and carbon steel Suspension: Hutch H-900; 50,000 lbs Single Point Tandem with Oscillating Trunnion Bushing Body: 1/4" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness) Walls Height of Body: 41.5"; 3.5"-6.5" lower than any other manufacturer; lowest center of gravity! Gate:3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness). Air operated high lift with integrated mud flaps. 78" opening! Front: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness) Top Rail: Single piece tube High-Strenght Steel, 45deg positioned Bracing: Internally braced with High-Strenght Steel Axles (GAWR): Two (2) 30,000 lbs. each axle with automatic slack adjusters and Steemco wheel ends. GAWR: 30,000 lbs Brakes: 16.5" x 7" brakes with 2S1M ABS Landing Gear: One (1) pair of drop legs, non-load bearing, w/ galvanized feet Radius Arms: 4”x3”x1/4” Steel Tube Tires: Eight (8) 11R x 24.5 16 Ply, All-Terrain Wheels: Eight (8) 8.25 x 24.5 Steel 10 hole Disc, white Access Ladder: One on the front and one on each side on the rear Paint Prep: All steel surfaces sandblasted and pre chem wash Coating: Hempel two coats of polyurethane on an epoxy primer. Any custom color available. Conspicuity tape: 3M Per DOT Fenders: Rear and front steel fenders Full Dump Position: Without lifting the front wheels Gate Latch Cylinder: Double action pneumatic 3.5" bore cylinder Gate Lift Cylinders: 1 Pair of 4"x24" Aluminum Round Pneumatic Cylinders Tail Gate Electric Connection: 4-Way female receptacle Lights: Sealed harness and recessed LED per DOT and ICC Mud Flaps: Two (2) Anti-sail attached to rear gate Tarp: Cramaro electric FlipNGo tarp system operated through the 4-Way receptacle Electric Tarp Connection: Trailer Socket, 2 Pole, Vertical Pin Paint Color: White, Black, Silver are standard paint colors, but can custom paint Option- Wheels: Aluminum Option-Length: 24-38 ft Option- Frame: Quarter frame Option- Fenders: Aluminum Front

    重量与尺寸

    长度
    9.75 m
    宽度
    259.08 厘米

    承载量

    气动大小
    20.26 m3

    类别特定

    组成
    半圆
    Dump Angle
    46 °
    High Lift Gate
    Air Gate
    Tarp
    Tarp Type
    Electric
    Ladder
    Ladder Location
    侧面

    机壳

    框架类型
    无框架
    悬挂
    单点
    轮胎
    11R24.5 16 Ply
    轮子
    全钢
    后轴数量
    串联
    轴类别
    固定
    车辆总重
    14590
    挡泥板
    Mud Flaps