2024 ROME TBW20

2024

ROME

TBW20

新建

Wheel Offset Disk Harrow - This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. 11” (279mm) disk spacing; 1-5/8” (41mm) round axles; Equipped with Timken dual tapered roller bearings. 20 Disks, 57-82 Suggested Engine HP, 224lbs (102kg) Weight Per Disk, 4490lbs (2037kg) Net Weight. *Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter. FEATURES: • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • High gang carrier design to prevent trash build up and clogging. • Levels, cuts, and mixes to full working depth. • Combines ease of maneuverability with high strength for the most adverse conditions. • Up to 277lbs (126kg) of weight per disk blade depending on model with an average of 240lbs (109kg). • Up to 9” (229mm) maximum depth of penetration with standard 26” (660mm) diameter disk blades. • Equipped with Timken dual tapered roller bearings. • Adjustable disk blade scrapers. • Dual purpose transport unit for transportability and penetration control. STANDARD EQUIPMENT: • Adjustable disk blade scrapers. • 26” (610mm) diameter x 5/16” (8mm) thick; cutout (notched) deep concavity disk blades. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • New industrial tires – 2 each. TBW-16: 7.5 x 16 – 6 ply. TBW-20 and TBW-24: 7.5 x 16 – 10 ply. TBW-32: 12.5L x 15 – 12 ply. TBW-40: 16.5L x 16.1 – 10 ply. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Two heavy duty gang wrenches. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • 28” (711mm) diameter x 5/16” (8mm) thick, cutout (notched) deep concavity disk blades. • Drawbar with track type clevis. • Cylinder rod stops for positive depth control adjustment.

2.44 m