致电询价
常规
年限
2024
制造商
ROME
型号
TRCW16
状况
新建
描述
Wheel Offset Disk Harrow - For Use with Tractors in the 300-400hp Range.
*Engine horsepowers are suggested ranges and vary according to soil conditions and weight added to harrow. Per ASAE S290.1 – Width of cut will vary with gang angle and disk blade diameter.
NOTE: This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation.
20” (508mm) disk spacing; 2-1/2” (64mm) round axles; Equipped with Timken dual tapered roller bearings.
16 Disks, 1009lbs (459kgs) Weight Per Disk, 16137lbs (7335kgs) Net Weight.
FEATURES:
For deep plowing, plowing in heavy trash, mixing and aerating.
Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity.
Adjustable disk blade scrapers.
Equipped with Timken dual tapered roller bearings.
High gang carrier design to prevent trash build up and clogging.
Up to 1092lbs (497kg) of weight per disk blade depending on model.
Standard 13” (330mm) depth of penetration with 36” (914mm) diameter disk blades.
Optional 15” (381mm) depth of penetration with 42” (1.07m) diameter disk blades.
STANDARD EQUIPMENT:
Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor.
36” (914mm) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
Adjustable disk blade scrapers.
Drawbar jack stand and safety chain.
Heat treated alloy steel gang axles.
OPTIONAL EQUIPMENT:
Heavy duty fabricated steel spacer spools.
42” (1.07m) diameter x 1/2” (13mm) thick, cutout (notched) deep concavity disk blades.
Heavy duty bearing wear plates.
New industrial tires – 2 each TRCW-12 and TRCW-16: 15 x 22.5 – 16 ply.
Cylinder rod stops
Oil Bath Bearings
重量与尺寸
宽度
3.66 m