2024 ROME TCW16

2024

ROME

TCW16

新建

Wheel Offset Disk Harrow - This harrow requires hydraulic control. One rear tractor hydraulic circuit required for harrow operation. 9 1/2" (241mm) Disk Spacing, 1-5/8" (41mm) Round Axles, Equipped w/ Timken Dual Tapered Roller Bearings. 16 Disks, 30-56 Suggested Engine HP, 175lbs (79kg) Per Disk, 2813lbs (1276kg) Net Weight. *Suggested hp range - may vary according to soil conditions and weight added to harrow. Per ASAE S290.1 - Width of cut will vary with gang angle and disk blade diameter. FEATURES: • Heavy duty proven design with rugged boxed angle construction welded for maximum strength and rigidity. • High gang carrier design to prevent trash build up and clogging. • Levels, cuts, and mixes to full working depth. • Combines ease of maneuverability with high strength for the most adverse conditions. • Up to 178lbs (81kg) of weight per disk blade depending on model with an average of 171lbs (78kg). • Up to 8” (203mm) maximum depth of penetration with standard 24” (610mm) diameter disk blades. • Equipped with Timken dual tapered roller bearings. • Adjustable disk blade scrapers. • Dual purpose transport unit for transportability and penetration control. STANDARD EQUIPMENT: • 24” (610mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades. • Adjustable disk blade scrapers. • Heat treated alloy steel gang axles. • Heavy duty cast steel spacer spools. • Heavy duty bearing wear plates. • New industrial tires – 2 each. TCW-16 thru TCW-24: 12.5L x 15 – 12 ply. TCW-28 and TCW-32: 7.5 x 16 – 12 ply. TCW-36 and TCW-40: 12.5L x 15 – 12 ply. • Hydraulic control group includes cylinders, hose holders, and hoses with fittings to reach rear of tractor. • Two heavy duty gang wrenches. • Drawbar jack stand and safety chain. OPTIONAL EQUIPMENT: • 26” (660mm) diameter x 1/4” (6mm) thick, cutout (notched) deep concavity disk blades. • Cylinder rod stops for positive depth control adjustment. • Drawbar clevis for track type tractors

1.83 m